User's Manual

S610S Manual - Hardware Installer Manual - Version 1.8
1
I
I
n
n
d
d
e
e
x
x
1 Introduction 5
 How to use an S610S reader ..................................................................................... 7
 LED Card Response table ......................................................................................... 7
1.1 Cabling requirements ................................................................................................... 7
1.2 Typical S610S Access Control network ....................................................................... 8
 Using an Ethernet Control Module (ECM) ............................................................... 8
1.3 S610S/S600S PCB layout ............................................................................................ 8
2 Quick Guide to setting up S610S 9
3 Connecting an S610S Master Reader 11
3.1 Open the S610 reader case ......................................................................................... 11
3.2 S610S Master Reader 12V Power and Data connections ........................................... 11
3.3 Extra settings required, made on the reader ............................................................... 11
 Reader Address ....................................................................................................... 11
 Door Mode .............................................................................................................. 11
 Card Type ................................................................................................................ 12
 Read Head ............................................................................................................... 12
 Auxiliary Devices ................................................................................................... 12
3.4 Addressing an S610S master reader ........................................................................... 12
 S610S Reader in Normal Operation ........................................................................ 13
 Telnet or HyperTerm serial network controller ...................................................... 13
3.5 S610S Connecting Master Reader Inputs ................................................................... 13
 Test I/O states using reader’s diagnostic mode ....................................................... 14
3.6 Monitoring Inputs for Cable Tampers ........................................................................ 14
 Enable 4-state tamper detect ................................................................................... 15
3.7 Using an external read head ....................................................................................... 15
3.8 S610S Lock and spare output relay connections ........................................................ 15
 Connecting a lock .................................................................................................... 15
 Using a Fail secure lock connected to a reader ....................................................... 16
 Connecting a Sounder to a spare output relay ......................................................... 16
 Invert relay output ................................................................................................... 16
4 Connecting an S610S to an Exit Reader 17
4.1 S610S Master Reader 12V Power and Data connections ........................................... 17
 Setting the Master S610S Exit reader configuration ............................................... 17
 Devices Application - Setting the S610S Exit reader configuration ....................... 18
4.2 S610S Master with Slave input connection table ....................................................... 18
5 Connecting an S610S to a DIU 19
5.1 Connecting an S610S to a DIU210 ............................................................................ 19
5.2 Connecting a powered lock to a DIU ......................................................................... 20
 Using a Fail secure lock connected to a DIU .......................................................... 20
 S610S with DIU Input connection table ................................................................. 20
 Set up the S610S with DIU ..................................................................................... 21
 Devices Application - Setting the S610S Exit reader and DIU configuration ........ 21
 Local Sounder output ............................................................................................. 21
6 AC2000 Devices Application tasks 23
6.1 Add the S610S reader to the AC2000 system ............................................................ 23
 Add S610S Exit/slave reader .................................................................................. 23
 Enable Read head – S610S only ............................................................................. 23
6.2 Changing reader Door Mode TIME duration settings ................................................ 23
6.3 Changing other reader settings ................................................................................... 24