User's Manual
Table Of Contents
- 1 Introduction
 - 2 Quick Guide to setting up S610S
 - 3 Connecting an S610S Master Reader
- 3.1 Open the S610 reader case
 - 3.2 S610S Master Reader 12V Power and Data connections
 - 3.3 Extra settings required, made on the reader
 - 3.4 Addressing an S610S master reader
 - 3.5 S610S Connecting Master Reader Inputs
 - 3.6 Monitoring Inputs for Cable Tampers
 - 3.7 Using an external read head
 - 3.8 S610S Lock and spare output relay connections
 
 - 4 Connecting an S610S to an Exit Reader
 - 5 Connecting an S610S to a DIU
 - 6 AC2000 Devices Application tasks
 - 7 Door Modes
 - 8 Interlock
 - 9 Other AC2000 software configurations
 - 10 S610S onboard diagnostic mode
 - 11 Appendix
 
S610S Manual - Hardware Installer Manual - Version 1.8 
  2 
6.4  Access control using PIN Only .................................................................................. 26 
6.5  Card, Cardswipe and PIN or PIN ONLY options ...................................................... 27 
6.6  Extended Timezone configuration ............................................................................. 28 
7  Door Modes  30 
7.1  Door mode .................................................................................................................. 31 
7.2  Verification 24, Verification 32 ................................................................................. 31 
 Desfire Verification ................................................................................................. 31 
 Encrypted verification – Mifare Finch .................................................................... 31 
7.3  Passenger mode .......................................................................................................... 31 
 Interlocking Passenger mode (Lobby Mode) .......................................................... 32 
7.4  Control Post mode ...................................................................................................... 32 
7.5  PIR mode .................................................................................................................... 32 
7.6  Passenger-staff exit mode ........................................................................................... 33 
 Air-Bridge with Passenger-Staff exit mode ............................................................ 33 
 Second Swipe Action configuration ........................................................................ 34 
7.7  Trolley mode .............................................................................................................. 35 
7.8  Turnstile Mode ........................................................................................................... 35 
 Selecting S610S Turnstile Mode ............................................................................. 35 
 Single S610S reader – Fail Secure/Fail Safe ........................................................... 35 
 Controlling power to a turnstile .............................................................................. 36 
 Wiring a bidirectional turnstile ............................................................................... 36 
 S610E/S610S Inputs and Outputs ........................................................................... 36 
 AC2000 – Configuring Turnstile Mode .................................................................. 38 
7.9  Equipment Enable mode ............................................................................................ 39 
 Setting Timing controls on equipment .................................................................... 39
 Functionality ........................................................................................................... 39 
 Automatic equipment disable feature ...................................................................... 40 
 Equipment Enable - Time settings .......................................................................... 40 
 Equipment Enable card usage outcome codes ........................................................ 40 
 Connection Diagram for Equipment mode ............................................................. 41 
 AC2000 software settings for equipment mode ...................................................... 41 
 Equipment Mode; Input configuration .................................................................... 41 
 Alarm Configuration ............................................................................................... 42 
7.10  Multiple badge access ................................................................................................ 42 
8  Interlock  43 
8.1  Interlock in Door Mode .............................................................................................. 43 
 Configure the reader’s interlock input .................................................................... 43 
 Configure the reader’s interlock output .................................................................. 43 
 Configuring Interlock Input IP 3, or IPB (if DIU) .................................................. 43 
8.2  Passenger mode interlock – Lobby Mode .................................................................. 44 
 Without a Valve Lobby Controller ......................................................................... 44 
 No access on interlock ............................................................................................ 44 
 With a Valve Lobby Controller ............................................................................... 44 
9  Other AC2000 software configurations  45 
9.1  To Edit or Add an input for AED alarm management ............................................... 45 
 S610E input table – No DIU ................................................................................... 45 
 S610E with DIU Input table .................................................................................... 45 
9.2  Disabling an Input using AC2000 software ............................................................... 45 
9.3  Input/output Mapping ................................................................................................. 46 
 Mapping an input to an output ................................................................................ 46 
9.4  Configuring a spare Output Relay .............................................................................. 46 
 Connecting a Sounder. ............................................................................................ 47 
9.5  Other AC2000 configuration options ......................................................................... 47 










