User's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Guide to setting up S610S
- 3 Connecting an S610S Master Reader
- 3.1 Open the S610 reader case
- 3.2 S610S Master Reader 12V Power and Data connections
- 3.3 Extra settings required, made on the reader
- 3.4 Addressing an S610S master reader
- 3.5 S610S Connecting Master Reader Inputs
- 3.6 Monitoring Inputs for Cable Tampers
- 3.7 Using an external read head
- 3.8 S610S Lock and spare output relay connections
- 4 Connecting an S610S to an Exit Reader
- 5 Connecting an S610S to a DIU
- 6 AC2000 Devices Application tasks
- 7 Door Modes
- 8 Interlock
- 9 Other AC2000 software configurations
- 10 S610S onboard diagnostic mode
- 11 Appendix
S610S Manual - Hardware Installer Manual - Version 1.8
56
11.4 S610S Specification Sheet
S610 Series (Grey) – Product Codes Model Reader Exit Reader
S610S Prox RDR-611-101 RDR-612-101
S610S Mifare RDR-611-105 RDR-612-105
S610S Multitech RDR-611-104 RDR-612-104
S610S PicoPass RDR-611-606 RDR-612-606
S610S multi smart card reader RDR-611-608 RDR-612-608
S610S No Head RDR-611-109 RDR-612-109
S610 Series (Black) – Product Codes Model Reader Exit Reader
S610S Prox RDR-611-111 RDR-612-111
S610S Mifare RDR-611-115 RDR-612-115
S610S Multitech RDR-611-114 RDR-612-114
S610S PicoPass RDR-611-616 RDR-612-616
S610S multi smart card reader RDR-611-618 RDR-612-618
S610S No Head RDR-611-119 RDR-612-119
Power
7-14V dc
200mA – passive comsumption
320 mA – peak consumption
Reader Enclosure Size (HxWxD) 142 x 115 x 44mm (5.6 x 4.5 x 1.7”)
Liquid Crystal Display 32 x 122 monochrome LCD
Backlit and heater element
LED Indicators Green – Accept
Red – Reject
Amber – Invalid
Keypad
0-9 plus and
Security features Read head and electronics sealed to IP65 in polycarbonate
enclosure.
Protected by tamper sensor.
Offline database Up to 194,000 transactions and card details
Internal Memory 2 Mbytes
32 Mbytes with optional Compact Flash
Biometrics interface Two RS232/RS485
HEAD TYPE
Read Head -125 Khz
...............................
Inside Technologies PicoPass™
...........
Mifare Read Head -13.56Mhz
................
Two spare weigand interfaces
SUPPORTED CARDS
CEM37
HID Licenced, Corporate 10000
Kantech
PicoPass™ (S610SP only)
Mifare / Mifare PS21
H0 Master, H1 optional Read Out read head.
Supported Default Card Formats
............
Supported External readheads
................
MagStripe ................................
................
Wiegand ................................
..................
Legic ................................
.......................
SENSORMATIC32 / SENSORMATIC37
SIMPLEX36, HID1000, VANCOUVER34
KANTECH
WIEGAND26 / WIEGAND32
WIEGAND26 / WIEGAND32
WATERMARK
Communications Interfaces
To Host
To Exit Reader
RS485
RS485, 19200 Baud
Cable specification Belden 8723
Outputs
Two Relays fitted, rating 30Vdc @5A.
Change over volt free contacts
with programmabe duration.