User's Manual
Table Of Contents
- Introduction
- Mounting the Terminal
- Wiring the Terminal
- 3.1 Cabling requirements
- 3.2 The front board
- 3.3 The input/output board
- 3.4 Wiring locks
- 3.5 Terminal with Request to Exit switch
- 3.6 Configuration information
- 3.7 Terminal with third-party OSDPv2 read head
- 3.8 Terminal with third-party Wiegand read head
- 3.9 Terminal with DIU 230 and third-party Wiegand read head
- 3.10 Configuration information
- 3.11 S700e with S700s exit reader
- 3.12 S700 with DIU 210 and S700s exit reader
- 3.13 S700 terminal with DIU 230
- 3.14 Tamper detection on reader inputs
- Reader Network Configuration
- AC2000 Software Configuration
- The System Configuration Menu
- S700 Operational Modes
- Appendix 1 Updating Firmware
- Appendix 2 Broadcast and Timezone Priorities
- Appendix 3 Loading card definitions
S700-IM-0088-1.72
CHAPTER 1 : Introduction
14
Wrong time Access is not
granted as you are
attempting to gain
access outside the
allocated time
Amber
Wrong zone Access is not
granted as you do
not have
permission to enter
this zone
Amber
PIN Entry, time out Access is not
granted as you
have taken too long
to enter your PIN
Amber
Card passed back Access is not
granted, you must
comply with the
anti-passback site
access policy
Amber
UI Screen Message Description
Multi-colour status
light
Table 1: Response Screens for S700