User's Manual
Table Of Contents
- Introduction
- Mounting the Terminal
- Wiring the Terminal
- 3.1 Cabling requirements
- 3.2 The front board
- 3.3 The input/output board
- 3.4 Wiring locks
- 3.5 Terminal with Request to Exit switch
- 3.6 Configuration information
- 3.7 Terminal with third-party OSDPv2 read head
- 3.8 Terminal with third-party Wiegand read head
- 3.9 Terminal with DIU 230 and third-party Wiegand read head
- 3.10 Configuration information
- 3.11 S700e with S700s exit reader
- 3.12 S700 with DIU 210 and S700s exit reader
- 3.13 S700 terminal with DIU 230
- 3.14 Tamper detection on reader inputs
- Reader Network Configuration
- AC2000 Software Configuration
- The System Configuration Menu
- S700 Operational Modes
- Appendix 1 Updating Firmware
- Appendix 2 Broadcast and Timezone Priorities
- Appendix 3 Loading card definitions
S700 Installation Manual
13
Response Screens
The response screens are described in Table 1: Response Screens for S700:
UI Screen Message Description
Multi-colour status
light
Access granted Access is granted Green
Not in system Access is not
granted as card is
not registered on
the system
Red
Expiring Card Access is granted
and your card is set
to expire within 14
days
Green
Expired card Access is not
granted as your
card has expired
Red
Lost or Stolen card Access is not
granted as your
card has been
reported as lost or
stolen
Red
Table 1: Response Screens for S700