User's Manual
Table Of Contents
- Introduction
- Mounting the Terminal
- Wiring the Terminal
- 3.1 Cabling requirements
- 3.2 The Front Board
- 3.3 The Input/Output Board
- 3.4 Wiring locks
- 3.5 Terminal with Request to Exit Switch
- 3.6 Configuration information
- 3.7 Terminal with 3rd Party Wiegand Read Head
- 3.8 Configuration information
- 3.9 Terminal with S610s Exit Reader
- 3.10 Terminal with DIU 210
- 3.11 Terminal with DIU 230
- 3.12 PoE+ Terminal with S610s Exit Reader
- 3.13 Tamper Detection on Reader Inputs
- Reader Network Configuration
- AC2000 Software Configuration
- The System Configuration Menu
- Door Modes
- Appendix II: Device Settings Remote Application
- Appendix III: Broadcast and Timezone Priorities
- Appendix IV: Loading Card Definitions
- Appendix V: Configuring a Third Party Reader as a Master
TSR-IM-0045-1.6
CHAPTER 1 : Introduction
2
1.1 Terminal specifications
emerald is available in three models; the TS100, TS200 and TS300.
Door access reader Configured on an AC2000 system to provide full
access control at the door, including monitoring
inputs and triggering alarms.
Maintenance information point View terminal information including software version,
network settings, door mode and database details.
Intercom This facility provides a voice link between the
terminal and AC2000 workstation via Voice over IP.
Remote Applications terminal Remote Applications run on the AC2000 server and
include terminal, card swipe and alarm reports.
These Applications can be accessed by cardholders
with appropriate permissions.
1.1.1 CEM emerald product codes
Contact CEM sales for further information.
Note
The typical read range for the internal 13.56Mhz head is 3 – 5cm
Important
The appropriate card definitions must be loaded onto the CEM Central Database Computer (CDC). See Loading
Card Definitions on page 83. If using Desfire EV1 cards not provided by CEM, please refer to the User Defined
Keys manual to configure card keys.
Feature TS100 TS200 TS300
Door access reader
Maintenance information point
Intercom
Remote Applications terminal
Table 1: Terminal features
Card
technology
TS100 TS200 TS300
Available in FCC/IC
approved model
Mifare CSN TSR/100/105 TSR/200/105 TSR/300/105 FCC: QABTSR105V910
IC: 12009A-TSR105V910
CEM Desfire TSR/100/107 TSR/200/107 TSR/300/107 FCC: QABTSR105V910
IC: 12009A-TSR105V910
iClass/iClass SE TSR/100/108 TSR/200/108 TSR/300/108 FCC: QABTSR608V930
IC: 12009A-TSR608V930
PicoPass TSR/100/106 TSR/200/106 TSR/300/106 -
multi smart card
reader
TSR/100/608 TSR/200/608 TSR/300/608 FCC: QABTSR608V930
IC: 12009A-TSR608V930
Table 2: List of CEM emerald product codes