User's Manual

A2SE67-UG-0011-1
CHAPTER 5 : AC2000 Software Configuration
44
5.5 Assigning Remote Applications (TS300 model only)
To assign Remote Applications to users open AC2000 WEB by typing the IP address of the
AC2000 CDC into a browser and select System | Utilities | Remote Apps Allocation
Three steps must be taken in order to assign Remote Applications. First, a group or groups are
created by user type and then Remote Applications are added to the group. The final step is to
select the cardholder’s record in the AC2000 Personnel application and assign the Remote
Application Group to the user.
Note
For further information about setting up Remote Applications on the terminals consult the
AC2000 Web manual.
5.5.1 Creating groups
To create a Group of Remote Applications:
1. Select the Add Group button.
2. In the text box enter a Group Name and click the ADD button. (A Group Name could refer
to user types, e.g, Support, Managers, Engineers.) 
If appropriate tick the Default Group check box to make the group the default setting in
the Personnel Application.
3. Press the Return button.
5.5.2 Adding remote applications to groups
To add Remote Applications to a group ensure the group name is selected in the Group drop 
down list.
Figure 32 Adding Remote Applications to groups
1. Select a Remote Application or Applications by clicking on them in the blue pane (this
moves it to the grey pane, placing it in the selected Group).
2. Click Save.