User's Manual
Table Of Contents
- Introduction
- Mounting the Terminal
- Wiring the Terminal
- 3.1 Cabling requirements
- 3.2 The Front Board
- 3.3 The Input/Output Board
- 3.4 Wiring locks
- 3.5 Terminal with Request to Exit Switch
- 3.6 Configuration information
- 3.7 Terminal with 3rd Party Wiegand Read Head
- 3.8 Configuration information
- 3.9 Terminal with S610s Exit Reader
- 3.10 Terminal with DIU 210
- 3.11 Terminal with DIU 230
- 3.12 PoE+ Terminal with S610s Exit Reader
- 3.13 Tamper Detection on Reader Inputs
- Reader Network Configuration
- AC2000 Software Configuration
- The System Configuration Menu
- Door Modes
- Appendix II: Device Settings Remote Application
- Appendix III: Broadcast and Timezone Priorities
- Appendix IV: Loading Card Definitions
- Appendix V: Configuring a Third Party Reader as a Master
47
Chapter 6
The System Configuration Menu
emerald utilises an intuitive Graphical User Interface to access terminal functionality. At the basic level,
the screen is used to display meaningful messages regarding the current card swipe transaction. The
more advanced options allow the user to access information and reports that are relevant to them.
The emerald touch screen is a high quality capacitive screen, which is highly responsive in
multiple weather conditions. The reader interface provides access to a variety of tools, reports
and information such as:
• Terminal configuration options
• Diagnostics and tests
• Software and hardware versions
• User specific Remote Applications
6.1 Menu Overview
Figure 34 Overview of the system configuration menu