User's Manual

2
Introduction
The SAM-1000 uses the latest microprocessor technology to operate door strikes
and security systems that require a momentary (timed) or latching dry contact
closure.
All programming is done through the keypad. Codes and operating parameters are
stored within the microprocessor and can not be lost due to power failure.
The SAM-1000 can store 1000 prox cards and user 4 digit codes. Each 4 digit code
has 10,000 possible combinations. The unit has one relay with 5 Amp contacts.
CONTENTS Page
Introduction ……………………………………………………………. 2
Product Specifications …………………………………………………. 3
Intramural Interface Circuit…………………………………………….
Mounting & PCB Diagram ……………………………………………. 4
Wiring Diagram ………………………………………………………. 4-5
Engineer Programming Information and Notes …………………….. 5
Engineer Programming
Factory Default Setting ………………………………………….. 6
Changing Master & User Codes………………………………….. 7
Setting Functions of Master & User ……………………………. 7
Set Door Relay Strike ……………………………………………… 7
Set Door Open Detection Time …………………………………. 8
Security Arrangement ……………………………………………. 9
Exit Engineer Programming Mode ……………………………… 9
Resetting Non Volatile Memory ………………………………………. 9
Installer Information & Notes …………………………………………… 9
Technical Specifications ….…………………………………………… 10