User's Manual

Specifications

1. Programmable Functions

Relay latching or momentary

Relay activate independently or together

Change Codes 1 master, 1000 users & prox cards

Door open detection

2. Programmable Timers

Door relay time 00-99 seconds

Door open detection 00-99 seconds

Alarm time 00-99 minutes

3. Wiring Connections

Electric lock

External bell

External Push Switch

Magnetic Contacts

Alarm

4. Keypad:

12 keys

5. Programming memory:

Non volatile Eeprom memory

IMPORTANT INFORAMTION

There are no user serviceable parts contained within the SAM-1000 access control

keypad.

If holes are to be drilled before mounting onto a wall, check for hidden cables and/or

pipes before drilling. Use safety goggles when drilling or hammering in cable clips.

Every effort has been made to provide accurate information, however slight variations

can occur. We also reserve the right to make changes for product improvement at

any time

NOTE

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO

INSTALL THE SAM-1000

Intramural Interface Circuit

1. Alarm output interface (See Figure 1)

2. Electric lock interface (See Figure 2)