User Manual

3
Carton Inventory
SK1-H Access Controller
Self Tapping Screws Wall Anchors
Screw Driver Diode IN4004 (For relay circuit protection)
Manager Card
INSTALLATION
Install
 Remove the back cover from the unit
 Drill 2 holes(A,C) on the wall for the screws and one hole for the cable
 Knock the supplied rubber bungs to the screw holes(A,C)
 Fix the back cover firmly on the wall with 4 flat head screws
 Thread the cable through the cable hole(B)
Adjustable Alarm Output Time
Lock Output Load
Alarm Output Load
0-3 minutes (1 minute default)
3 Amp Maximum
3 Amp Maximum
Wiegand Interface Wiegand 26-37 bit input/output
Environment
Operating Temperature
Operating Humidity
Meets IP66
-30℃ ~60℃, or -22°F ~ 140°F
10% ~ 90% Non-Condensing
Physical
Surface Finish
Dimensions
Unit Weight
Shipping Weight
Zinc-Alloy Enclosure
Powder Coat
L: 120* W: 76 * H: 25 (mm)
600g
700g