User Manual

9
lockout or alarm (factory
default)
Keypad Lockout
7 1 #
Alarm Output
7 2 #
Light and Sound Setting
To set keypad backlight
7 4 # To disable keypad backlight
7 5 # To enable the keypad backlight (factory default)
To set LED
7 6 # To disable the red LED
7 7 # To enable the red LED (factory default)
To set keypad tone
7 8 # To disable the keypad tone
7 9 # To enable the keypad tone (factory default)
Alarm output time
To set the alarm output time (0~3
minutes)
Factory default is 1 minute
9 0~3 #
To remove the alarm
To reset the Door Forced Open
warning
Read valid card or Master Code #
To reset the Door Open Too Long
warning
Close the door or Read valid card or Master Code #
1.5. Panic User Setting
There are 10 groups Panic PIN/card available. When people are under duress to open the
door, they can use the panic PIN or card, and under the situation, the door will open, at
the same time, the output alarm operates.
To set Panic PIN User
To add a PIN user
8 user ID number # PIN #
(The ID number is any number between 1001~1010.)
To delete a PIN user
2 user ID number #
To set Panic card user
To add a card user
8 user ID number # card #
(The ID number is any number between 1001~1010.)
To delete a card user
2 user ID number #
Note:
① User ID number must be any 4digits between 1001~1010
② Panic PIN/card must be unique, should be distinguished from common PIN and card
(When the Panic PIN/card is the same with common PIN and card, they will become
invalid in Duress, and worked as common user function)