Owner manual

4.5 Using the
Printing Features
The prox.pad plus unit in conjunction with the op-
tional IEI PDA Data Collection Device (DCD) can cap-
tureaTransactionLogandaProgrammedUserList
via the IR port. The Log Dump command is:
70#0#0#**
The User Dump command is:
25#0#0#**
4.5.1 Selecting
Transaction Log
Information
You can selectively program specific transaction events
to print or not on the Transaction Log. By “masking”
out certain events, you direct the unit not to save those
events in memory and thus not be available for the
log. The factory default is for all transaction events to
besavedinmemoryandprintedonthelog.Toturn
OFF an event (keep it from being logged), enter:
73#EventCode#0#**
To turn an event ON, enter:
73#EventCode#1#**
Event # Description
1 access denied - invalid PIN
2programdenied
4REX
5 Propped Door
6 Door Closed
7 Forced Door
16 logdumpedbyuser#N
17 access granted to user #N
19 access denied to user #N, bad timezone
20 toggle mode activated by user #N
(latch set)
21 toggle mode de-activated by user #N
(latch clear)
22 1st in auto-unlock triggered by user #N
23 door relocked by user #N
24 user lockout enabled by user #N
25 user lockout disabled by user # N
26 access denied to user #N - user is
disabled
Chapter 4: Program ming 4.5 Using the Printing Features
4-30 prox.pad plus Install/Program. Manual, PPP, D4b
Part No. 6105679, Rev. 1.1