User Manual

SECO-LARM
®
U.S.A., INC.
INSTALLATION MANUAL
ENFORCER
®
Page 8
Curtain/Barrier Sensors Installation Manual
®
PICTN1
E-9680-10B25 -- 10-Beams, 80-Inches Long, Black
E-9660-8B25 -- 8-Beams, 60-Inches Long, Black
E-9644-6B25 -- 6-Beams,44-Inches Long, Black*
E-9622-4B25 -- 4-Beams,22-Inches Long, Black*
E-9611-2B25 -- 2-Beams,11-Inches Long, Black*
*Available in White
Curtain/Barrier Sensors
(E-9622-4B25 shown)
Range: 50 ft. indoor, 25 ft. outdoor
Dimensions:
Side View
1
5
/
16
” (33.5mm)
1
7
/
32
” (30.6mm)
7
/
8
” (22.3mm)
3
/
4
” (19.6mm)
11.25” (29cm) -- E-9611-4x25
22.5” (57cm) -- E-9622-4x25
44.5” (113cm) -- E-9644-6x25
60.1” (153cm) -- E-9660-8B25
79” (201cm) -- E-9680-10B25
E-9611-2x25 E-9622-4x25 E-9644-6x25 E-9660-8B25 E-9680-10B25
80mA 89mA 94mA 102mA 110mA
60mA 73mA 79mA 92mA 100mA
11
1
/
4
” x 1
5
/
16
” x
7
/
8
”22
1
/
2
” x 1
5
/
16
” x
7
/
8
”44
1
/
2
” x 1
5
/
16
” x
7
/
8
”60
1
/
8
” x 1
5
/
16
” x
7
/
8
” 79” x 1
5
/
16
” x
7
/
8
”
0.5~20mS 0.5~32.5mS 0.5~48.5mS 0.5~60mS 0.5~70mS
Specifications:
Standby -- 12~24VDC
Active -- 12~24VDC
Dimensions
Response time
Maximum range
Detection method
Output
Operating temperature
Attenuation LED
Enclosure / Case
Mounting bracket
Indoor: 50’ (16m), outdoor: 25’ (8m)
Simultaneous break of 2 adjacent beams or any single beam (programmable)
NO./NC. relay output, 1A @ 12 ~ 24VDC
-49 ~131 F (-45 ~55 C)
(On): powered, aligned properly*
(Flashing): beam is broken or unaligned*
(Off): no power*
*Depending upon how programmed
IP65 / Al alloy
Included
CurtainSensor032309b.pmd
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in
normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or
property damages of any kind to the purchaser or anyone else.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM
policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2009 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole
or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: [phone] Fax: [phone]
Website: www.seco-larm.com
E-mail: sales
@ seco-larm.com