User's Manual

ManualsBrandsControllino ManualsComputers & AccessoriesControllino Hotspot

S. 1

User manual CONTROLLINO Hotspot

Get Started with your Hotspot

First of all, thank you for your trust in Controllino and for purchasing a Controllino Hotspot! We

hope that you will have a pleasant experience with it and earn some good amount of

HNT! Please read this guide carefully to get your hotspot running as quickly as possible.

Prepare your Hotspot

Please take out Controllino Hotspot of the packaging box and screw the antenna on it.

Next, plug in a LAN cable into your internet router and then into the Controllino

Hotspot.

Plug your Hotspot into the power outlet

Now, it’s finally time to plug your hotspot into the power outlet. Please follow the

instruction images carefully.

As you can see, we are using a DC plug with locking mechanism. This ensures that the

cable connection always remains stiff and stable and reduces chances that the cable

gets loosened or unplugged accidentally.

Summary of content (9 pages)

PAGE 1
User manual CONTROLLINO Hotspot Get Started with your Hotspot First of all, thank you for your trust in Controllino and for purchasing a Controllino Hotspot! We hope that you will have a pleasant experience with it and earn some good amount of HNT! Please read this guide carefully to get your hotspot running as quickly as possible. Prepare your Hotspot Please take out Controllino Hotspot of the packaging box and screw the antenna on it.
PAGE 2
S.
PAGE 3
Wait for 45 minutes Wait at least 45 minutes after plugging your Hotspot to the power outlet. Just let it sit there and grab a coffee or tea in the meanwhile. This is needed to give your hotspot some breathing time to fully boot up, start the syncing process and download any updates that were released while it was on the way to you. While you wait, you can dive in deeper into the official Helium Docs to learn and understand how the network works, how your earnings work and many more.
PAGE 4
Remember it carefully! You can only reset it when you are logged in. If you are logged out of the dashboard and forgot your password, you will need to contact support, so they can reset it for you. Step 2: Generate a QR Code Wait until the dashboard shows your miner name and miner height info. This can take a few seconds and sometimes up to a minute. S.
PAGE 5
After that, open the "Onboarding" tab. Here, you need to enter your wallet address of Helium App. You can find your address in the Account tab in the Helium App on your phone or tablet. There, you can click on the green Copy Address button: S.
PAGE 6
S.
PAGE 7
Copy your address into the "My Wallet address" input field and click on Submit. Wait a few seconds until the page reloads and open the "Onboarding" tab again. You will see your QR Code and can move to the next step. Step 3: Scan the QR Code in Helium App or click the yellow button You can now scan the QR code with the Helium app, or (if you have the dashboard open on your phone where you have your Helium App installed) click on the "Click here to open the Helium App" yellow button.
PAGE 8
During this time, is is possible that the Helium app or Explorer doesn't show your hotspot, or it shows “No Location asserted” in your list of hotspots, or it doesn’t list your hotspot in the list at all. That’s normal, let it propagate for a few hours and you will see it online.
PAGE 9
Antenna gain: +2 dBi NB: In the standard use of the device a minimum distance of 20 cm between the radiant element and the human body has to be maintained. CONELCOM GmbH (CONTROLLINO) Dr Franz Werner Straße 32 6020 Innsbruck, Tirol Austria S.