Instruction manual

Installation
LATCH Installation
This child restraint system is recommended for use in a vehicle
with LATCH anchors. Verify that your vehicle is equipped with
LATCH anchors.
Lower Anchor Straps Installation:
1. Press and hold the rst LATCH adjuster release
button, then pull the LATCH strap to full length.
Repeat for the remaining LATCH connector (Fig. A).
2. Place the child restraint forward-facing on the
vehicle seat.
3. Attach one LATCH connector to its adjacent vehicle
LATCH anchor (Fig. B).
a. An audible click conrms attachment
b. Ensure that the LATCH strap is not twisted.
4. Attach the remaining LATCH connector to its
adjacent vehicle LATCH anchor.
a. An audible click conrms attachment
b. Ensure that the LATCH strap is not twisted.
5. Push the child restraint into the vehicle seat while
pulling each LATCH strap tight (Fig. C).
NOTE:
If an audible click is not heard when connecting either LATCH
connector, the LATCH strap may be twisted, or there may be
debris in the LATCH connector. Correct either situation before
continuing with the installation process.
IMPORTANT:
Ensure the LATCH strap does not fold into the LATCH adjuster
while tightening.
Fig. A
Fig. B
Fig. C
8
Lower Anchor and Tethers for CHildren