Instruction manual

Functions

Head Support Depth Adjustment

The Head Support can be adjusted forward or backward by 0.6” (1.5 cm) increments to provide a

better t and added protection for the occupant (Fig. A).

To Adjust: Remove screws on each side of the head support with a Phillips screwdriver. Move the

head support to selected position, and reinsert screws (Figs. B & C).

Head Support Contour Adjustment

The head support can be contoured to better t and protect the head.

This adjustment must be performed on limited bases (to not weaken

the head support structure) by the dealer.

Head Pillow Adjustment

The Head Pillow provides added comfort and positioning.

To reposition: Grasp the head pillow and pull it away from the head

support. Place the head pillow where desired and press down to

ax Velcro.

Head Support

Fig. A

Fig. B

Fig. C

(Use holes 1,2 or 3 on both sides)