Instruction manual

Functions

IMPORTANT:

· Height of the shoulder harness strap moves with the height

of the backrest.

· The Shoulder Harness Strap must be at or above the child’s

shoulders, and parallel to the ground.

· The Shoulder Harness Strap is for positioning only, and not

designed to support occupant in a crash.

Backrest Height Adjustment

The height of the backrest can be adjusted as the child grows.

To adjust: Pull and hold the black “D” shaped ring at the top of the

backrest to release lock. While pulling the release strap, move

backrest to desired height and let go of release strap. To fully

engage the lock, slightly move backrest until it “clicks” into place.

Note: The seat belt may need to be lengthened. To lengthen the

seat belt, remove the retaining screw and gray plastic cover on

each side of the restraint system. Pull seat and back apart, and

adjust strap to desired length. Slightly tuck the loop on the strap

to prevent strap from interfering with the retaining screw.

Reinstall the strap, align the silver bars of seat & back, replace gray

plastic cover, and reinsert screws.

Backrest Extensions - 2” or 4” (OPTIONAL ACCESSORY)

Backrest Extensions are designed to ll the space

exposed between the backrest and the seat when you

extend the backrest.

To add an extension, snap the Backrest Extension(s) onto

exposed rods.

Backrest

Backrest Extensions snaps

into place by pushing.