Instruction manual

Functions
Seat Depth Adjustment
The seat depth can be adjusted a maximum of 1.4” (3.5 cm) by
moving the location of the Seat Depth Adjustment Knob.
To change the seat depth; remove the adjustment knob, reposi-
tion to the desired location and reattach.
Note: The knob MUST go through the plastic cover, the seat back
rod and the seat rod.
Footrest (OPTIONAL ACCESSORY)
Footrests are available in three sizes - short, medium and long.
Footrest Depth Adjustment: Pull and hold the black “D” shaped
ring - Seat Depth Release Lever and adjust to desired position.
Footrest Length Adjustment: Using a ½” wrench, loosen bolts on
the bottom of the side support tubes, move footplate to desired
position and tighten. Repeat on opposite side.
Support Tray (OPTIONAL ACCESSORY)
The Support Tray (Upper Extremity Support
Surface) provides added support for the upper
body. It attaches with Velcro located on the side
of the restraint.
Wedge Cushion (OPTIONAL ACCESSORY)
The wedge changes the seat-to-back angle by raising the front of
the restraint system. Place the wedge under the front of the
Carrot 3 seat.
Medium
12”-16”
Large
14”-18”
Small
10”-12”
19
Saet
Depth
Release
Lever