User`s guide

CONVAID USER’S GUIDE

Fig.25

Depending on the user’s degree of ability or pre-

scription from a doctor or physical therapist, the

back angle may need adjustment. Adjusting the

back angle may also affect the seat depth.

Partially fold chair to relieve fabric tension (see

folding instructions on page 3). Unhook the

Velcro® strip at the back of the chair connecting

the seat fabric to the back fabric. Use a wrench

(7/16”) to remove the bolt connecting the seat

tube to the back tube. Relocate to desired posi-

tion and replace bolt. Repeat on other side.

Reattach the Velcro® strip. Fig.25

Seat-to-back angle:

85° - first hole (lower)

90° - second hole

95° - third hole

Seat-to-Back Angle Adjustment

Thr

ee-Point Positioning Belt

Fig.26

The three-point pelvic positioning belt adjusts to keep the user

securely in position, and comes standard on the chair.

The positioning belt consists of two adjustable side straps, a

three-point quick-release buckle, and a depth adjustable crotch strap.

The three-point buckle is the connecting point for both side straps

and the crotch strap. The side straps are mounted to each side of the

frame and connect via clasps inserted into the sides of the buckle.

The crotch strap is attached to both the seat and the bottom of

the buckle.

To Buckle:

Insert the clasps into the

side of the buckle. Adjust

belt for a comfortable and

secure fit. Fig.26

To Release:

Press the red button on the

black buckle and pull out

the clasps.