User`s guide

CONVAID USER’S GUIDE

Remove outer pad first by pulling tab

downward. Fig.83 To remove inner

pad, insert a 2.5 mm Hex wrench into

screw (A) Fig.84 and turn clockwise

until the back of the pad is clear of its

housing.

Remove calipers from the axle brackets

by unscrewing Hex bolts

(A) & (B)

with a 5 mm wrench. Fig.82

With a small screwdriver (A), press the pad downward until it is clear of its hous-

ing. Fig.85 Remove the two springs from the old pad assembly. Fig.86 (A)

Attach the two springs to the new pad assembly making certain that the hooks are

properly seated over the two sheet metal steps. Fig.87

Removal of Brake Pads

Fig.82

Fig.87

Fig.85 Fig.86

1 mm

Clear Housing

Fig.83

Fig.84