User`s guide

Replacing Pads
Return calipers to the axle bracket
using Hex bolts (A) and (B) and
Hex wrench. Fig.91 & 92
Make sure Hex bolts are
securely tightened.
Test brakes for effectiveness. Brake
levers should move approximately
25 mm.
NOTE:
A brake system needs
some time to break in.
Initially, the rubbbing of
the pad on disc may
cause some noise.
Cleaning
To avoid damage to the brake seals, use
only alcohol or water when cleaning the
caliper parts.
B
A
Fig.91
Fig.92
CONVAID USER’S GUIDE
27