User`s guide

Seat Depth
Fig.21
Measure from the most
posterior portion of the
buttocks to the back of
the knee. Subtract from
that measurement 1-2” to
allow adequate clearance
between the seat and the
back of the knee. Fig.20
To change seat depth, partially fold
the chair to relieve fabric tension.
Undo the Velcro® back panel of the
two-piece seat. Grasp end of seat
tube, depress spring button and move
seat tube until spring button relocates
into the desired hole. Repeat for other
side of seat. Fig.21
Seat depth
CONVAID USER’S GUIDE
5
Fitting Guide
Correct seating and positioning encourages good posture, which in
turn aids circulation, breathing and digestion. Please take the time
to properly adjust the chair to fit the user. If the user is not correctly
positioned, check the accessories section of this manual to see if one
or more of our accessories would help to facilitate posture or consult a
physical therapist. Improper seating can cause posture problems.
Please consult a physical therapist or doctor for additional guidance.
When properly fitted, Convaid chairs will provide years of comfortable
use. As the user grows, refer back to this Fitting Guide to adjust the
dimensions of the chair.
Fig.20