Operating instructions

A
B
B
D
C
Fig. 2
RECOMMANDATIONS DE MISE EN PLACE
1
INSTALLATION AND MOUNTING
3
A: 25 cm (10 in.) B: 10 cm(4 in.)
C: 20 cm (8 in.) D: 50 cm (20 in.)
- Identify where you want to install the heater,
providing sufficient clearance around the unit
(Fig. 2).
- Locate and unscrew the lower bracket.
- Turn the bracket upside down and screw it
back on the heater making sure it is placed in
the right position (Fig. 3).
- Unscrew the top bracket from the back of
the heater. Fasten it to the wall in the position
shown in the diagram below (mark A), making
sure that it is level (Fig. 4).
CAUTION : Use screws and anchors adapted to the wall
type and weight of the heater (12.5 kg / 27.5 lbs, not including
towels).
- Hook the heater on the top bracket.
Mark the location of the bottom bracket hole.
- Fasten the lower bracket to the wall with a pro-
per screw and anchor.
- The heater should be installed no lower than
25 cm (10 in.) from the floor. Leave a minimum
clearance of 10 cm (4 in.) on each side of the
heater, 20 cm (8 in.) above the unit and 50 cm
(20 in.) in front for a proper air circulation (Fig.2).
Model A B C D
DIVA
108,5 cm 11,2 cm 21,7 cm 21,2 cm
3/4
(42 ”)
3/8
(4 ”)
3/8
(8 ”)
1/2
(8 ”)
Edge of the heater
Edge of the heater
C
B
B
24cm
22cm
34cm
A
D
Air inlet
of the heater
- Do not block
- No junction box
in this wone
Fig. 4
Lower bracket
Fig. 3
5.
1/2
(9 ”)
3/8
(13 ”)
5/8
(8 ”)