Operating instructions

HEATER
HEATER
HEATER
HEATER
R
R
R
R
R
R
W
W
B
B
B
B
B
B
B
B
G
G
G
G
C
C
C
C
P = PURPLE R = RED B = BLACK G = GREEN C = COPPER W = WHITE PW : PILOTE WIRE
PW
PW
P
P
P
P
RECOMMANDATIONS DE MISE EN PLACE
1
ELECTRICAL CONNECTION
4
- CONVECTAIR recommends that your heater be installed by a qualified
electrician and in accordance with national and local codes.
- To prevent short circuits and electrical shocks turn the power off at the main
panel before attempting the installation or making any repairs.
- If the power cable is damaged it must be replaced by the manufacturer, an
approved service depot or a technician with similar qualifications to avoid any
danger.
CAUTION :
This heater must be connected to a 240 Volt or 208 Volt (60 cycles) circuit.
- Disconnect the power supply before making wiring connections to prevent
electrical shock and equipment damage. If you are using a Programmer system,
make sure to cut the power off ALL electrical heating circuits in the home (for
more information, see the CONVECTAIR model 7392 installation notice).
- A standard rectangular 2x3 in. junction box must be installed in the wall, prior
to electrical hookup. The box must be of appropriate size to receive the
necessary electrical connections and the 2 ‘' x 4 ‘' (7 cm x11,5 cm) cover that
is supplied with the heater.
!
RESPECT WIRE COLOR CODING
WITH the use of a pilot wire (PW)
WITHOUT the use of a pilot wire (PW)
CANADA
CANADA
U.S.A
U.S.A
6.
POWER LINE
POWER LINE
POWER LINE
POWER LINE
3/4 1/2