Owners manual

STYLE NO. 09 0102 MISSION OAK

09 0102W MISSION WHITE

CODE NAME FIGURE Q'TY CODE NAME FIGURE Q'TY

parts@convenience-concepts.com

. Broken or Missing Parts?

. Need help with Assembly?

BACK PANEL

Please do not return to the store

2PCS

12PCS

c 1PC

1PC

BOTTOM

SUPPORT RAIL

1PC

TOP SUPPORT

RAIL

1PC

If you have any questions just call 1-800-468-6447 or email us at

KNOB BOLT

FRONT PANEL

KNOB

DESK TOP

RIGHT SIDE

PANEL

1PC

LEFT SIDE

PANEL

FLIP DOWN

FRONT PANEL

MISSION DESK

KEYBOARD

TRAY

1PC

PARTS LISTHARDWARE LIST

WOOD DOWEL

WOOD SCREW

(1/2"L)

CAM LOCK

12PCS

GLUE 1PC

CAM BOLT 10PCS

2PCS

10PCS

PAGE 1
MISSION DESK STYLE NO.
PAGE 2
STEP 1 Insert Cam Bolts ( b ) into Side Panels ( A ) & ( B ). HARDWARE NEEDED b. 6 PCS STEP 2 HARDWARE NEEDED a. 8 PCS 6 PCS c. 1 PC g. Install Wood Dowels ( a ) as shown below. Connect Flip Down Front Panel ( H ) to Side Panel ( B ). Gently tighten cam locks (C). Repeat process for Top Support Rail ( C ) and Bottom Support Rail ( D ). Fasten Side Panel ( A ) to unit assembly, gently tighten cam locks . c a **** Assembling the unit with cam and wood dowels.
PAGE 3
STEP 3 HARDWARE NEEDED b. 4 PCS Insert Cam Bolts ( b ) into Desk Top ( F ). STEP 4 Insert Wood Dowels into assembly (a) as shown below. Place Desk Top ( F ) onto unit assembly and gently tighten cam locks ( c ). **** HARDWARE NEEDED 4 PCS a. 4 PCS c. 1 PC g. Assembling the unit with cam and wood dowels. B C A Gently screw cam dowel into the threaded anchor. D Lightly glue one end of the wood dowel and tap halfway into hole. Add 2nd drop of glue to top of dowel.
PAGE 4
STEP 5 Install Back Panel ( E ) to Back of Desk with Wood Screws ( d ). HARDWARE NEEDED d. 12 PCS STEP 6 Install Front Panel Knobs ( f ) to Flip Down Front Panel ( H ) using the KnobBolts ( e ). HARDWARE NEEDED e. 2 PCS f.
PAGE 5
STEP 7 Carefully slide Key Board Tray ( G ) into Desk and Enjoy!