Owners manual

ASSEMBLY INSTRUCTIONS

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

Broken or missing parts?

Need help with assembly?

If you have any questions just call 1-800-468-6447 or email us at

parts@convenience-concepts.com

STOP

111960ES

HARRI CONSOLE TABLE

PAGE 1
HARRI CONSOLE TABLE 111960ES ASSEMBLY INSTRUCTIONS
PAGE 2
* Special note : we recommend the use of a hand held screw driver to avoid the stripping of screw heads.
PAGE 3
Exploded Views 1 2 4 5 3 Step 1 B 1. Insert wood dowel (C) into back panel 4 . 2. Connect middle panel 2 to back panel 4 using long ﬂat screws (B) .
PAGE 4
Step 2 D 1. Connect frames 5 to assembly using short allen screws (D) and allen wrench (I) . X2 I 5 X1 5 2 D 4 D Step 3 1. Insert wood dowel (C) into bottom panel C 3. 2. Connect bottom panel 3 to assembly using long allen screws (F), allen wrench (I) and large screws (G) .
PAGE 5
Step 4 1.Place top 1 D upside down on carpet or other soft surface . 2. Connect top 1 to assembly using short allen screws (D) , medium allen screws (E) and allen wrench (I) . X4 I X1 5 D D E 4 X2 1 E E Step 5 1. Attach handle (H) to drawer as shown using short ﬂat screws (A).
PAGE 6
Step 6 1.Connect the safety wall strap (K) to unit as shown using short ﬂat screw (A). 2.Drill hole slightly smaller than plastic anchor (L) into drywall and gently tap plastic anchor into hole. 3.Connect safety wall strap (K) to plastic anchor (L) as shown using long ﬂat screw (B) and ﬂat washer (J) .