Owners manual

ManualsBrandsConvenience Concepts ManualsEntryway & Hallway FurnitureOslo Storage Console

Assembly instructions

203199/203199GY/203199W

Oslo Storage Console

We have designed our furniture with you,the customer in mind.Our clear,easy to follow

step by step instructions will guide you through the project from start to finish.

Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of

furniture that will go together smoothly and give years of enjoyment.

　　Please do not return to the store

　　Broken or missing Hardware?

　　Need help with Assembly?

　　If you have any questions just call 1-800-468-6447 or email us at

　　parts@convenience-concepts.com

CONVENIENCE

CONCEPTS

STOP

Summary of content (4 pages)

PAGE 1
CONVENIENCE CONCEPTS Oslo Storage Console 203199/203199GY/203199W Assembly instructions We have designed our furniture with you,the customer in mind.Our clear,easy to follow step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of furniture that will go together smoothly and give years of enjoyment.
PAGE 2
*Special NoteW e recommend the use of a hand held screwdriver to avoid the stripping of screw heads.* 1 x1 2 x1 3 x1 6 x1 A x6 7 x2 8 x2 B x6 Cam Bolt Cam Lock I x2 J x6 C x4 Hinge Screw K x2 9 x1 D x4 Door Pin L x4 F x4 Allen Bolt Lock Nut Magnet Screw Handle Bracket Screw Assembling the unit with cams and wood dowels. A Gently screw cam bolt into the threaded anchor.
PAGE 3
Step 2 Step 1 4 A A 1 B A A LL K 5 L A L K 6 B B B 1 B A 1.Insert Cam locks (B) into Panels 4 , 5 and 6 . 1.Screw Cam bolts(A)into Panel 1 . 2.Attach Magnets(K)to Panel 1 using Screws(L). 2.Connect Panels 4 5 , 6 to Panel 1 by gently tightening Cam LocksB). Step 3 Step 4 4 3 5 6 1.Slide Back Panel 3 into grooves of Panels. 1.Decide which side of Doors 9 and 10 you would like on display 2.Attach HandlesM) to Doors 9 and 10, on side you want to display，with Screws（N). 3.
PAGE 4
Note: Threads on barrel nut(F) must face holes. Step 6 Step 5 O P O O P O O 7 E O E P F 8 P 8 2 7 F E E 1.Attach Legs 7 to Side Bars 8 using BoltsE) and Lock NutsF). 1.Attach Leg Assembly to Panel 2 using 2.Place PadsP) onto bottoms of Legs 7 . Screws(O). Step 7 H H H H 9 H 10 11 1.Place Support Pins(H) into desired holes. 2.Carefully place lnner Shelves 11 onto Support Pins(H). 3.Enjoy.