User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER

USER'S MANUAL, VERSION 5.0

4.4 Charging the CS108

The CS108 can be charged by inserting a USB cable with the following plugs:

1) USB Type C plug on one side

2) USB Type A plug on the other side

3) The above Type A plug connecting to a USB charger with the traditional Type A socket

2 LEDs will light up:

1) “Ext. Power” LED: Blue LED. Whenever the USB is connected with power supply, this

blue LED will light up.

2) “Charging” LED: Red LED. When battery is heavily drained, this red LED will be bright.

When battery is completely recharged, this red LED will be very dim. So if you connect

the USB cable and this LED is very dim, do not be alarmed. It just means the battery is

pretty full already.