CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 CSL CS208-3G Intelligent Integrated RFID Reader with GPS User’s Manual Version 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 1 USER'S MANUAL, VERSION 1.0.0 Content 1 CONTENT .......................................................................................................................................................2 2 FCC STATEMENT .........................................................................................................................................5 3 INTRODUCTION ..........................................................................
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 5.4.5.9 BURN-IN PROGRAM (B)..................................................................................................................... 39 5.4.5.10 TEST LED (1) .................................................................................................................................... 40 5.4.5.11 TEST BUZZER (2).........................................................................................
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7.2 PORT FORWARDING ..................................................................................................................................... 93 (TO BE DEFINED) .................................................................................................................................................. 93 8 REGULATORY INFORMATION ............................................................................
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 2 USER'S MANUAL, VERSION 1.0.0 FCC Statement FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination is expressly forbidden.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 SpecificationsĻ Physical Characteristics: Length: 300 mm; Width: 300 mm; Height: 100 mm Weight: Edge Software: 3.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3.1 3.1.1 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3.1.2 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3.1.3 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 4 USER'S MANUAL, VERSION 1.0.0 Hardware Installation 4.1 4.1.1 Hardware Content of CS208-3G CS208-3G Reader Overview The CSL CS208 is the first INTELLIGENT INTEGRATED Reader in the world with GPS, embedded edge server and a wide selection of connectivity, including 3G/GSM/GPRS, SMS, Ethernet, USB and Serial. Front panel of CS208.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 4.2 USER'S MANUAL, VERSION 1.0.0 Operating Setup 4.2.1 Installation 4.2.1.1 Install the SIM card - 1. Open the GSM SIM and SD card slot cover - 2. Insert the GSM SIM card into the GSM SIM card slot. The contact pins of GSM SIM card should be followed the below photo. '^D ^/D ĐĂƌĚ ;DŝŶŝͲ^/DͿ - 3. '^D ^/D ĐĂƌĚ ;DŝĐƌŽͲ^/DͿ Close the GSM SIM card/SD card slot Cover.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 4.2.1.2 USER'S MANUAL, VERSION 1.0.0 Install SD card - 1. Open the GSM SIM and SD card slot cover. - 2. Insert the SD card into the SD card slot - 3. Close the cover of GSM SIM card/SD card Slots.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 4.2.1.3 Install Power Supply 4.2.1.4 Install USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 4.2.1.5 Install Ethernet 4.2.1.6 Install USB USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5 USER'S MANUAL, VERSION 1.0.0 Software Application 5.1 Software Content of Shipment Package The software of CS208 includes the following: 1. Demo Applications and Demo to run CS208 reader: default setting CS208BackendServer.exe CS208CommissioningAndFwUpgrade.exe Default setting file: default.ini (For user to define default setting of CS208-3G) 2. Bootloader CS208 Bootloader: u-boot_532M_v1.0.0.5_20140206.bin 3. Operating System WinCE 6.0: 4.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.3 USER'S MANUAL, VERSION 1.0.0 Default Setting CS208 is shipped out with default setting stored in the file factory.def. User can refer to factory.def in the software package to define the default setting of CS208 reader and reconfigure the reader. User is required to define the default setting file as default.ini and download the file to run CS208 the first time. User can download the defined default.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.3.1 USER'S MANUAL, VERSION 1.0.0 Format of default.ini for initial setting of CS208 RFID reader [DEVICEID] Model = CS208 ID = SerialNumber ; Model Name ; Device ID (default set to CS208 Reader internal serial number if the ID = SerialNumber, you can change it other name) ; Communication mode (GPRS / NETWORK / USB / SMS / SERIAL) CommMode = NETWORK [NETWORK] DHCP = N IP = 192.168.25.208 Subnet = 255.255.255.0 Gateway = 192.168.25.1 DNS1 = 192.168.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS Offset2 = 0 Count2 = 0 TagScanningCycle = 1 TagScanningTime = 10 TagDuplicateFilterTime = 10 USER'S MANUAL, VERSION 1.0.0 ; Second additional data Offset ; Second additional data length (word) ; Tag scanning cycle (minute), 0 = continuous read ; Tag scanning time (second) ; Tag duplicate filter time (second) [DATETIME] NTP1 = time.nist.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4 USER'S MANUAL, VERSION 1.0.0 CS208 Burn-In Demo program startup procedure 5.4.1 Server (Far-end Computer) Setup 1. Manually input the TCP/IP properties to target PC / Server to connect CS208 with default setting. IP address: 192.168.25.100 Subnet Mask: 255.255.255.0 ġ ġ ġ 2. Run "CS208BackendServer.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.2 USER'S MANUAL, VERSION 1.0.0 Client Setup - 1. Hardware: Ensure CS208 "Control Serial" port to PC “COM port” is connected. - 2. Run "putty.exe" program in PC with setting as follow: Select “Serial” Set the COM port number, for example “COM1”, that is connected to the “Control serial” port of CS208. Input the Speed of “9600” for the above used COM port. “Serial” to enter to the further setup page of the COM port.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS - USER'S MANUAL, VERSION 1.0.0 3. In the COM setup page, select “None” in field of the “Flow control”. And then press “Window” to enter to the “Window Setup Page”.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS - USER'S MANUAL, VERSION 1.0.0 4. In “Window” setup page, in order to clearly display the information from CS208, it is better to set the “Window” as below. ^Ğƚ ͞ ŽůƵŵŶƐ͟ ƚŽ ϭϮϬ ^Ğƚ ͞ZŽǁƐ͟ ƚŽ ϰϬ ^Ğƚ ͞>ŝŶĞƐ ŽĨ ƐĐƌŽůůďĂƌ͟ ƚŽ ϭϬϬϬϬϬ - 5.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS - 6. USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.3 5.4.3.1 USER'S MANUAL, VERSION 1.0.0 CS208 Normal Mode CS208 Reader in Normal Mode 1. After setup “PuTTY” in 4.4.2. Client Setup, power up CS208. 2. The Power LED on the front panel will be lighted up as below ͞WŽǁĞƌ KŶ͟ > ǁŝůů ďĞ ůŝŐŚƚĞĚ ƵƉ ĂĨƚĞƌ ƉŽǁĞƌ ƵƉ ^ϮϬϴ 3. After CS208 search the GSM network, “GSM” LED will flash slowly.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. When the announcement “Press ‘P’ to enter Production test or press ‘E’ to enter Engineering test” is displayed, user has 20 seconds to enter the “Production test” mode with pressing “P” or to enter the “Engineering test” mode with pressing “E”. At this moment, just WAIT until the reader count down from 20 to 0 and skip self test mode. 5.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.3.2 USER'S MANUAL, VERSION 1.0.0 Server (Remote Computer) in Normal Mode When the reader enters normal operation mode after power up, ensure the CS208 Backend Server (Remote computer) is turned on and press “Start”. RFID Tag data will be displayed according to the setting of TagScanningInterval, TagScanningTime and TagDuplicateFilterTime in default.ini In default.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.4 - - USER'S MANUAL, VERSION 1.0.0 CS208-3G Self-Test Mode 1. After setting up “PuTTY” in Client Setup, power up CS208. Watch the printout on the PuTTY screen connected to the Control Serial Port. Make sure that window is the ACTIVE window on the screen. 2. The Power LED on the front panel will light up as below ͞WŽǁĞƌ KŶ͟ > ǁŝůů ďĞ ůŝŐŚƚĞĚ ƵƉ ĂĨƚĞƌ ƉŽǁĞƌ ƵƉ ^ϮϬϴ - 3. After CS208 search the GSM network, “GSM” LED will flash slowly.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 - 4. At that point you will see a the announcement “Press ‘P’ to enter Production test or press ‘E’ to enter Engineering test” is displayed and the number in the bracket will decrement. The user has 20 seconds to enter the self test mode.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.5 5.4.5.1 USER'S MANUAL, VERSION 1.0.0 CS208 Self Test Menu Reset to Factory setting (SHIFT-0) 1. User can reset CS208 configuration file “default.ini” to initial setting (factory.def) using SHIFT-0 in Self Test Menu. 2. In the menu of Self Test Menu, choose “SHIFT-0: Reset to Factory setting ….” 3. CS208 undergoes factory reset and return message shown as below. 4. And then auto-return to Self Test Menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.5.2 USER'S MANUAL, VERSION 1.0.0 Change GSM Antenna (SHIFT-1) 1. In the menu, check “SHIFT-1: Set to Next GSM Antenna”. The default value of “Antenna” is 1. 2. If you want to change antenna from 1 to 2, press “SHIFT” and “1” together. 3. The result is displayed when the test is finished. Current value of antenna is set to 2. 4. If you want to change antenna back from 2 to 3, press “SHIFT” and “1” together again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.5.3 USER'S MANUAL, VERSION 1.0.0 Set Test Server IP (SHIFT-2) 1. In the menu, check “SHIFT-2: Set Test Server IP …”. 2. The default “Test Server IP” is “192.168.25.100”. 3. If you want to change “Test Server IP”, press “SHIFT” and “2” together. 4. Input the new IP address of Test Server. (for example: 218.103.18.229) 5. Press “Enter” 6. The menu is displayed with the new IP address as shown below. New IP 5.4.5.4 Change APN Name (SHIFT-3) 1.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 6. The menu is displayed with the new APN name as shown below. New APN 5.4.5.5 Set Test SMS Phone Number (SHIFT-4) 1. In the menu, check “SHIFT-4: Set Test SMS Phone Number…”. There is no default value for SMS Phone Number 2. If you want to change “SMS Phone Number”, press “SHIFT” and “4” together. 3. Input the new SMS Phone Number for test. 4. Press “Enter” 5. The menu is displayed with the new APN name as shown below.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 is 64 2. If you want to set Buzzer volume, press “SHIFT” and “5” together. 3. Input the new Buzzer volume. (Example: 45) 4. The menu will be shown on the screen again. Current value of Buzzer volume is set to 45. New Buzzer Volume 5.4.5.7 Set GPS Antenna (SHIFT-7) 1. In the menu, check “SHIFT-7: Set to Next GPS Antenna”. The default value of “Antenna” is 1. 2.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 New GPS Antenna Note: 1 = Internal GPS Antenna; 2 = External GPS Antenna 5.4.5.8 Test Buzzer Tone (SHIFT-8) 1. In the menu, check “SHIFT-8: test Buzzer Tone”. The default value of Buzzer Tone is 0 (There are 3 tones output sequentially, one for Read Tag 1 alert, one for Read Tag 2 alert, and one for Write Tag alert when you press “2” to test Buzzer with Buzzer Tone value 0). 2.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 2. When Burn-in Program is entered, the next Test Item entered will be run continuously (“Running Cycle 1/2/3/4 …..” are seen) until the user press “any key” to exit as below. 5.4.5.10 Test LED (1) 1. In the menu, use “1” to test LED 2. The main menu is displayed again when the test is finished. 3. If the test is run with Burn-in Program, the result is displayed as above.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 5.4.5.11 Test Buzzer (2) 1. In the menu, use “2” to test Buzzer. Use “SHIFT-5” to set Buzzer Volume” and “SHIFT-8” to set Buzzer Tone before test Buzzer. 2. The main menu is displayed again when the test is finished. 3. If the test is run with Burn-in Program, the result is displayed as below. 5.4.5.12 Test RFID Reader (3) 1. In the menu, check “3” to test RFID Reader, with Dynamic Q, Dwell, Duration defined.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 3. After the time of duration defined (10 seconds), the test finished and the program return to menu 5.4.5.13 Test SMS (4) 1. In the menu, choose “4: Test SMS”, the reader can send SMS to Phone with number set in “SHIFT-4”, valid SIM card inserted with mobile service enabled in the reader. 2. Press “4” to test SMS. 3. The program returns to main menu when the test is finished. 4. The Mobile phone with No.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 2. When the menu is shown again, check “5: Check internet connection with server …..” and press “5” 3. The result is displayed as below. 4. The program automatically returns to the test menu. 5.4.5.15 Ping local area network server (6) 1. In the menu, use “SHIFT-2” to set target Test Server IP (Example: 192.168.25.100) 2. When the menu is shown again, choose “6: Ping local area network server ...” 3.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. The program automatically returns to the test menu. 5.4.5.16 Read GSM RSSI and Registration Status (7) 1. In the menu, if you want to check GSM RSSI and registration status, choose “7”. 2. The result is displayed (CSQ: GSM RSSI, CREG: GSM Registration) as below.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 3. The program automatically returns to the test menu. 5.4.5.17 Get GPIO status (8) 1. In the menu, if you want to get GPIO status, choose “8: Get GPIO Status”. 2. The returned message is displayed with status of GPI pins. GPO pins will toggle in a HIGH-to-LOW transition 3 times. 5.4.5.18 SD Card Test (9) 1. In the menu, if you want to run SD Card Test, check “9: SD Card 2 Test (External SD Card)”. 2.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. The program automatically returns to the test menu. 5.4.5.19 GPS Test (0) 1. In the menu, use “SHIFT-7” to set GPS Antenna used (Internal antenna or External Antenna). 2. Press “0” to run the GPS Test. 3. The result is displayed as below. 4. Press “any key” to stop the test and then turn to test menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 5.4.5.20 Write Tag Test (S) 1. Before run the “Write Tag Test”, you must know the EPC code of the Tag you want to Write. (for example: AD94250042D0A99850000007). 2. Press “S” to run the “Write Tag Test”. 3. Enter the EPC code of the Tag you want to write. 4. Enter the new EPC code you want to change (for example AD94250042D0A99850000018). 5. The test result is displayed as below. 6.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 5.4.5.21 Kill Tag Test (T) 1. Before run the “Kill Tag Test”, you must know the EPC code of the Tag you want to kill. (for example: AD94250042D0A99850000018). 2. Press “T” to run the “Kill Tag Test”. (Note: after kill a tag, the tag will be destroyed permanently!!!). 3. Enter the EPC code of the Tag you want to kill. 4. The test result is displayed as below. 5.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 5.4.5.22 Run Main Program (Normal mode) (N) Choose “N: Run Main Program (Normal mode)” will turn CS208 to return to normal operation mode from self test menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.4.6 USER'S MANUAL, VERSION 1.0.0 Debug Port Setup (Optional) In order to monitor the status of CS208, it is better to use the “Debug Serial” port of CS208 and “PuTTY” in PC side. The “PuTTY” Setup as follow: 1. Connect "Debug Serial" port to PC “COM port”. This “COM port” should be different from “Control Serial” port. 2. Run "putty.exe" PC program. 3. Select “Serial”. 4.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7. In the COM setup page, select “None” in field of the “Flow control”. And then press “Window” to enter to the “Window Setup Page”. ^ĞůĞĐƚ ͞EŽŶĞ͟ ŝŶ ͞&ůŽǁ ĐŽŶƚƌŽů͟ ĨŝĞůĚ ŶĚ ƚŚĞŶ ƉƌĞƐƐ ͞tŝŶĚŽǁ͟ ƚŽ ĞŶƚĞƌ ƚŽ ͞tŝŶĚŽǁ ƐĞƚƵƉ ƉĂŐĞ͟ 8.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 ^Ğƚ ͞ ŽůƵŵŶƐ͟ ƚŽ ϭϮϬ ^Ğƚ ͞ZŽǁƐ͟ ƚŽ ϰϬ ^Ğƚ ͞>ŝŶĞƐ ŽĨ ƐĐƌŽůůďĂƌ͟ ƚŽ ϭϬϬϬϬϬ 9. After setup, Press “Open” button 10.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.5 5.5.1 USER'S MANUAL, VERSION 1.0.0 CS208 Configuration Initial Setup 1. When CS208 is used in the first time, it is set to factory default setting and sends data to PC/Server via Ethernet in default static IP address 192.168.25.100. Therefore, user has to set PC for CS208 configuration as 192.168.25.100 at the beginning. 2. Connect CS208 to PC via Ethernet. Power up CS208. 3. Place some tags near CS208 for test.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. Open PC Software “CS208BackendServer.exe” in the PC for CS208 configuration. Wait until the CS208 reader appears and tag data is received.ġ ġ ġ ġ ġ ġ ġ ġ 5. If CS208 reader does not appear and no tag data is received, please refer to CSL CS208 User's Manual and reconfigure CS208 Default Setting File (default.ini) by connecting CS208 reader via USB connection. ġ 6.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7. Input the default.ini location, where the destination the Default Setting file (default.ini) will be copied to. After that choose and press “Get default.ini from Reader”. 8. The Default Setting file (default.ini) is copied from CS208 to the target directory.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.5.2 USER'S MANUAL, VERSION 1.0.0 Set modes to send data via GPRS and Ethernet Please backup default.ini before doing any modification on mode setting (GPRS / LAN) to send data. User may use the copy to recover CS208 for wrong setting of the default.ini file. 5.5.2.1 CS208 sends data via Ethernet 1. In default.ini, find the section [DEVICEID], set communication mode by setting CommMode: NETWORK. 2.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 ServerIP1: Set the IP address where the PC (in static IP) receive the data Port: Default is 9092 for Demo App SynchronizationInterval: Reader will send keep alive packet per this time in minute (To the PC as server) 3. In the section [NETWORK], set DHCP, IP, Subnet, Gateway and DNS for CS208 reader Please ensure that the CS208 reader and the target PC are configured in the same subnet address.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 6. When the default.ini is copied to CS208 reader, a success message will be displayed. Press OK and quit Reader Config. 7. Reboot CS208 after default.ini file is changed 8.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 9. Open PC Software “CS208BackendServer.exe” in the target PC. Wait until the CS208 reader appears and tag data is received.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.5.2.2 USER'S MANUAL, VERSION 1.0.0 CS208 sends data via GPRS 1. Before configure CS208 sends data in GPRS mode, please ensure that that SIM card is inserted to CS208 and the GPRS data service is enabled. 2. Please consult with Internet Service Provider or MIS in the company for the External IP address. Also Port Forwarding configuration is required so that the data will be map to PC with internal IP address.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. In the section [GPRS], set APN according to the country / region where CS208 is used 5. In the [SERVER] section, set static IP for target PC to be used. Normally ServerIP2 is used for setting Internet IP address target PC / Server is connected. Therefore BackendServer is set to 2. ServerIP1 can be ignored when ServerIP2 is used.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 6. Save and Close default.ini ġ 7. Copy the updated default.ini file from the directory back to CS208 using READER CONFIG again. Please note the default.ini location should remain unchanged. Choose and press “Send default.ini to Reader”. 8. When the default.ini is copied to CS208 reader, a success message will be displayed. Press OK and quit Reader Config. 9. Reboot CS208 after default.ini file is changed.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 10. Manually input the TCP/IP properties to target PC / Server: IP address: 192.168.25.141 Subnet Mask: 255.255.255.0 Gateway: 192.168.25.2 DNS1: 8.8.8.8 DNS2: 8.8.4.4 11. Open PC Software “CS208BackendServer.exe” in the target PC. Wait until the CS208 reader appears and tag data is received.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 CS208 Firmware Upgrade 5.6 5.6.1 Firmware Upgrade Overview User can have an overview of the files required for the firmware upgrade of the CS208 and the upgrade procedure in sequence. The CSL CS208 Firmware Upgrade procedure is important for users for their CS208 RFID Reader upgrade. Incorrect firmware upgrade procedure may lead to system halt and may not be unrecoverable. 5.6.1.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.2 USER'S MANUAL, VERSION 1.0.0 Firmware Upgrade Procedure Below is the firmware list of CS208 RFID reader: Firmware Device Application Operating System File Name CS208DeviceXX.XX.XX.zip (e.g. CS208 Device 2.0.1-DB.zip) CS208_wince_fa_XXXXXXXX_XXXX_532mhz_nk.nb0 (CS208_wince_fa_20140407_1642_532mhz_nk) u-boot_532M_vX.X.X.X_XXXXXXXX.bin Bootloader (u-boot_532M_v1.0.0.5_20140206.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.2.1 USER'S MANUAL, VERSION 1.0.0 PC IP Configuration before CS208 firmware upgrade Before firmware upgrade, user should check the IP configuration and firewall setting in PC. 1. Go to Local Area Connection Properties. Find Internet Protocol Version 4 (TCP/IPv4) and choose Properties. 2. Choose “Use the following IP address”. Set IP address (192.168.25.100), Subnet mask (255.255.255.0), Default gateway (192.168.25.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 3. Ensure the Windows Firewall is turned off. 4. Open Command Prompt and do ping test (“Ping 192.168.25.208” <– default CS208 IP address). Reply message will received for successful network connection.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.2.2 USER'S MANUAL, VERSION 1.0.0 CS208 Device Application firmware upgrade via Ethernet 5. After CS208 RFID reader is power up, wait 1 minute. 6. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 7. “CS208CommissioningAndFwUpgrade1.0.6” is used for Device Application upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 9. USER'S MANUAL, VERSION 1.0.0 Click “…” to choose the latest Device Firmware for upgrade (CS208 Device 2.0.1-DB.zip). 10.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 11. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 12. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.2.3 USER'S MANUAL, VERSION 1.0.0 CS208 Operating System firmware upgrade via Ethernet 4. After CS208 RFID reader is power up, wait 1 minute. 5. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 6. “CS208CommissioningAndFwUpgrade1.0.6” is used for OS firmware upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 7. Choose “Upgrade OS kernel” in the drop down list. 8. Choose the latest OS Firmware for upgrade (example: USER'S MANUAL, VERSION 1.0.0 CS208_wince_fa_20140407_1642_532mhz_nk.nb0) 9. Click “Upgrade” button to start upgrade.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 10. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 11. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.2.4 USER'S MANUAL, VERSION 1.0.0 CS208 Bootloader firmware upgrade via Ethernet 1. After CS208 RFID reader is power up, wait 1 minute. 2. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 3. “CS208CommissioningAndFwUpgrade1.0.6” is used for OS firmware upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 4. Choose “Upgrade Bootloader” in the drop down list. 5. Choose the latest Bootloader Firmware for upgrade (example: u-boot_532M_v1.0.0.5_20140206.bin) 6.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 8. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.3 5.6.3.1 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.3.2 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 5.6.4 Please refer to USER'S MANUAL, VERSION 1.0.0 Reset CS208 to Factory Setting 4.4.5.1 RESET TO FACTORY SETTING (SHIFT-0) to reset CS208 to factory setting.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 6 USER'S MANUAL, VERSION 1.0.0 Remote access CS208 via Ethernet and USB using Remote Desktop User can remote access the CS208 Integrated RFID Reader via Ethernet or USB interface using Remote Desktop. 6.1 Remote access CS208 via Ethernet 1. Run the Remote Desktop Tool “cerhost.exe”. 2. In the form “Remote Display Control for Window CE”, Choose “File > Connect…”.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3. USER'S MANUAL, VERSION 1.0.0 Wait several seconds until the active target device is displayed in the list. If no device is found in the list, please check the power of the reader and the Ethernet connection between the reader and the PC. Check the IP address of the target reader. 10. Choose the target reader in the list and press “OK” to confirm. 11. The Window CE Desktop of CS208 reader is ready for use.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 6.2 USER'S MANUAL, VERSION 1.0.0 Remote access Application via USB 1. Run the Remote Desktop Tool “cerhost_as.exe”. 2. The form “Active Sync Remote Display Control for CS208” is displayed, wait several seconds.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 3. USER'S MANUAL, VERSION 1.0.0 The Window CE Desktop of CS208 reader is ready for use.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 7 USER'S MANUAL, VERSION 1.0.0 Software Tools for CS208 setup 7.1 Wireshark - network protocol analyzer Wireshark is a network protocol analyzer which can help to capture the IP packet exchanges between the user PC and the RFID reader. User can download Wireshark from http://www.wireshark.org/download.html. It is a freeware. Below is the procedure for setting up the diagnosis of IP packet exchanges of the RFID reader: 4. Turn off PC Firewall 5.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS Capture > Options USER'S MANUAL, VERSION 1.0.0 6. Choose in the menu bar 7. In Options, set the Capture File destination with filename (*.pcapng). The captured data will be written to the file created. 8. Press “Start” button in Options. Wireshark starts capture data of IP packet exchanges.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 9. Power on RFID Reader. Check the IP of reader is set and recorded before use. 10. Turn on demo app software for CS208 RFID reader (CS208BackendServer.exe). 11. In Wireshark, set “ip.addr == 192.xxx.xxx.xxx (CS208 device IP address)” in the Filter box, the IP packet exchanges data record of RFID reader and PC is seen. Column “Source” shows the IP address of RFID reader (IP address = 192.168.25.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 12. User can press “Stop” icon to stop data capture when necessary. 13. User can find the saved capture file (*.pcapng) in the directory user defined in Step 4.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 7.2 USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS 8 USER'S MANUAL, VERSION 1.0.0 Regulatory Information 8.1 Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix A.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix B. SMS ERROR code list 8QDVVLJQHG XQDOORFDWHG QXPEHU 7KLV FDXVH LQGLFDWHV WKDW WKH GHVWLQDWLRQ UHTXHVWHG E\ WKH 0RELOH 6WDWLRQ FDQQRW EH UHDFKHG EHFDXVH DOWKRXJK WKH QXPEHU LV LQ D YDOLG IRUPDW LW LV QRW FXUUHQWO\ DVVLJQHG DOORFDWHG 2SHUDWRU GHWHUPLQHG EDUULQJ 7KLV FDXVH LQGLFDWHV WKDW WKH 06 KDV WULHG WR VHQG D PRELOH RULJLQDWLQJ VKRUW PHVVDJH ZKHQ WKH 06 V QHWZRUN RSHUDWRU RU VHUYLFH
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7KLV FDXVH LQGLFDWHV WKDW WKH QHWZRUN LV QRW IXQFWLRQLQJ FRUUHFWO\ DQG WKDW WKH FRQGLWLRQ LV OLNHO\ WR ODVW D UHODWLYHO\ ORQJ SHULRG RI WLPH H J LPPHGLDWHO\ UHDWWHPSWLQJ WKH VKRUW PHVVDJH WUDQVIHU LV QRW OLNHO\ WR EH VXFFHVVIXO 7HPSRUDU\ IDLOXUH 7KLV FDXVH LQGLFDWHV WKDW WKH QHWZRUN LV QRW IXQFWLRQLQJ FRUUHFWO\ DQG WKDW WKH FRQGLWLRQ LV QRW OLNHO\ WR ODVW D ORQJ SHULRG RI WLPH H J WKH 0RE
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 7KLV FDXVH LQGLFDWHV WKDW WKH HTXLSPHQW VHQGLQJ WKLV FDXVH KDV UHFHLYHG D PHVVDJH ZLWK D PHVVDJH W\SH LW GRHV QRW UHFRJQL]H HLWKHU EHFDXVH WKLV LV D PHVVDJH QRW GHILQHG RU GHILQHG EXW QRW LPSOHPHQWHG E\ WKH HTXLSPHQW VHQGLQJ WKLV FDXVH 0HVVDJH QRW FRPSDWLEOH ZLWK VKRUW PHVVDJH SURWRFRO VWDWH 7KLV FDXVH LQGLFDWHV WKDW WKH HTXLSPHQW VHQGLQJ WKLV FDXVH KDV UHFHLYHG D PHVVDJH VXFK WKDW WKH SURFHGXUHV GR QRW LQG
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 1R 6& VXEVFULSWLRQ [ 6& V\VWHP IDLOXUH [ ,QYDOLG 60( DGGUHVV [ 'HVWLQDWLRQ 60( EDUUHG [ 60 5HMHFWHG 'XSOLFDWH 60 [ 73 93) QRW VXSSRUWHG ; 73 93 QRW VXSSRUWHG ; 6,0 606 VWRUDJH IXOO [ 1R 606 VWRUDJH FDSDELOLW\ LQ 6,0 [ (UURU LQ 06 [ 0HPRU\ &DSDFLW\ ([FHHGHG ; 6,0 $SSOLFDWLRQ 7RRONLW %XV\ [ [ 8QVSHFLILHG HUURU FDXVH
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix C. Technical Support System integrators setting up the CSL CS208 Integrated Reader may encounter some problems. To quickly solve that, they are welcome to send the symptoms and configuration files back to techsupport@convergence.com.hk for support. Please send the following: 1) CS208 Factory Serial Number - best to take a photo of the label at the back of the reader and send the photo to CSL technical support team.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix D. RFID Basics Passive tag RFID technology involves the reader, the antenna and the tag. The reader sends out energy in the relevant frequency band to the antenna via RF cables, and the antenna radiates the energy out. This energy impinges on an RFID tag. The RFID tag consists of an antenna coupled to an RFID IC.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix E. Operation Profiles for RFID Region 2: FCC Profile 0 1 2 3 4 5 R-T Modulation DSB-ASK DSB-ASK PR-ASK PR-ASK DSB-ASK PR-ASK Tari (ȝs) 12.50 25.00 25.00 6.25 25.00 R-T speed (kbps) 40 80 40 40 160 40 PIE 2:1 1.5:1 1.5:1 1.5:1 1.5:1 Pulse Width (uS) 12.50 6.25 12.50 12.50 3.13 12.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Appendix F. RFID channels Region 2: FCC Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number Frequency (MHz) 1 902.75 18 911.25 35 919.75 2 903.25 19 911.75 36 920.25 3 903.75 20 912.25 37 920.75 4 904.25 21 912.75 38 921.25 5 904.75 22 913.25 39 921.75 6 905.25 23 913.75 40 922.25 7 905.75 24 914.25 41 922.75 8 906.25 25 914.75 42 923.25 9 906.