User's Manual
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved 32
5.4.4
CS208-3G Self-Test Mode
- 1. After setting up “PuTTY” in Client Setup, power up CS208. Watch the printout on
the PuTTY screen connected to the Control Serial Port. Make sure that window is the
ACTIVE window on the screen.
-
- 2. The Power LED on the front panel will light up as below
-
-
- 3. After CS208 search the GSM network, “GSM” LED will flash slowly.
WŽǁĞƌKŶ>ǁŝůů
ďĞůŝŐŚƚĞĚƵƉĂĨƚĞƌ
ƉŽǁĞƌƵƉ^ϮϬϴ
'^D>ĨůĂƐŚ
ĂĨƚĞƌ^ϮϬϴƐĞĂƌĐŚ
ƚŚĞ'^DŶĞƚǁŽƌŬ