User`s manual

866B programmer performs programming verification at the marginal level of supply

voltage, which, obviously, improves programming yield, and guarantees long data retention.

Various socket converters are available to handle device in PLCC, SOIC, PSOP, SSOP,

TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages.

866B programmer is driven by an easy-to-use control program with pull-down menu, hot

keys and on-line help. Selecting of device is performed by its class, by manufacturer or

simply by typing a fragment of vendor name and/or part number.

Standard device-related commands (read, blank check, program, verify, erase) are boosted

by some test functions (insertion test, signature-byte check), and some special functions

(autoincrement, production mode - start immediately after insertion of chip into socket).

All known data formats are supported. Automatic file format detection and conversion during

load of file.

The rich-featured autoincrement function enables to assign individual serial numbers to

each programmed device - or simply increments a serial number, or the function enables to

read serial numbers or any programmed device identification signatures from a file.

The software also provides a many information about programmed device. As a special, the

drawings of all available packages, explanation of chip labeling (the meaning of prefixes

and suffixes at the chips) for each supported chip are provided.

The software provide a full information for ISP implementation: Description of ISP connector

pins for currently selected chip, recommended target design around in-circuit programmed

chip and other necessary information.

The remote control feature allows being Pg4uw software flow controlled by other application

either using .BAT file commands or using DLL file. DLL file, examples (C/PAS/VBASIC/.NET)

and manual are part of standard software delivery.

Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are

generated by design software which is provided by manufacturer of respective programmable

device. Chips are programmer in-ZIF or through ISP connector (IEEE 1149.1 Joint Test

Action Group (JTAG) interface).

VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF

file and contains high-level IEEE 1149.1 bus operations. VME files are generated by design

software which is provided by manufacturer of respective programmable device. Chips are

programmer in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)

interface).

Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-Jam) or

JTAG chain (ISP-VME).

Attaching of more 866B programmers to the same PC (through USB port) is achieved a

powerful multiprogramming system, which support as many chips, as are supported by

866B programmer and without obvious decreasing of programming speed. It is important