User`s manual

Selftest of programmer

Insert 48 pins diagnostic POD - type I into ZIF socket of the programmer. 48 pins

diagnostic POD - type I must be inserted as 48 pins device.

Run selftest of programmer in PG4UW (Programmer / Selftest plus).

Selftest of ISP connector

Insert Diagnostic POD for ISP connectors #2 into ZIF socket of the programmer.

Diagnostic POD for ISP connectors #2 must be inserted as 48 pins device.

Interconnect 20 pins connector of Diagnostic POD for ISP connectors #2 with an ISP

connector of the programmer with an ISP cable, included in delivery programmer

package. Be sure that pins are interconnected properly (i.e. 1-1, 2-2, ..., 20-20).

Run selftest of ISP connector in PG4UW (Programmer / Selftest ISP connector…).

Calibration test

For optimal results with programmer we recommend you also undertake every 6 months an

extended test to check the calibration using 48 Pins Calibration test POD, Type I (optional

accessories, ord.no. 70-0438).

Insert 48 Pins Calibration test POD, Type I into ZIF socket of the programmer. 48 Pins

Calibration test POD, Type I must be inserted as 48 pins device.

Run calibration test of programmer in PG4UW (Programmer / Calibration test).