Instruction Manual

8.10. Sound setting
In standby mode, you can short press【 】to enter the menu mode, short press【 】to move the cursor to the “sound
setting ” option, and press【 】to enter items of the key sound, switch audio, playback sound setting. You can also short
press 【 】or【 】to set and adjust the required items, and short press【 】for confirmation. Short press 【 】
or【 】, and you can adjust the setting value. Confirmation can be made by short pressing【 】. You can also short press
【 】after the completion of setting to exist the menu setting.【Note】The device defaults the values of key sound,
switch audio, playback sound are 100%. And there are four level values to choose from 0, 50%, 75%, and 100%.
8.11 Infrared light of inner camera
In standby mode, you can short press【 】to enter the menu mode, short press【 】to move the cursor to the infrared
light option, and press【 】to enter the infrared light. You can short press 【 】or【 】to move the cursor to the
desired infrared light on state, and short press【 】to confirm the infrared light display state.【Note】After the infrared
light is turned on, the screen of the camera in the car will display black and white. The infrared light is divided
into three levels: Off, On, and Automatic, which can be set based on needs. When the light in the car is very dark,
you can turn on the infrared light for supplementary lighting, so as to strengthen the definition of the video files
inside the car.
8.12. Parking monitor
In standby mode, you can short press【 】to enter the menu mode, short press【 】to move the cursor to the power
supply mode option, and short press【 】to enter the power supply mode. You can short press 【 】or【 】to move
the cursor to select ACC power supply, and short press【 】to confirm and enter the “time-lapse recording" option.
【 Note 】 The “time-lapse recording" mode defaults to 2 frames/1 second 24 hours. After the “time-lapse
recording" is turned on, the device will automatically record for 24 hours and shut down after turning off the key.
In order to ensure the normal use of the machine during “time-lapse recording", please use a power cord with
ACC detection line.