Instruction Manual

VII. Basic Operation
7.1 Use the automatic recording function
If you start the car engine, the recorder will automatically start and turn on the recording function. In addition, the blue
charging indicator light is on, and the red video indicator light flashes. If the car engine is turned off, the recorder will
automatically save the recorded content and shuts down. The recorded images are saved in sections on the Micro SD card.
When the Micro SD card is full, the recorder will overwrite the earlier recorded images.【Note】The recorded loop time
period can be set in the menu by itself, with the range of four levels-- off/1/3/5 minutes.
7.2 Use manual recording function
In the case of external power supply, if the device is in shutdown state, the user can press and hold the【ON/OFF】of the
recorder for 2-3 seconds. If the blue power indicator light is constant on, and the red indicator light is off, the recorder
can be turned on and automatically start recording. If you need to shut down the machine, you can long press the
【ON/OFF】again for 2-3 seconds. Then the recorder can automatically save the record and shut down.
7.3 Use the camera function
In standby mode or video mode, you can short press the【 】key to take a photo. And the icon “ ”will pop up in the
upper left corner of the display screen during the shooting time.