Installation manual

installation manual TWIN 80 EN
(E000129016 - installation manual TWIN 80 EN - 030106v07
35
4.2.4. Chimney sweeper function (temporarily display for service purposes)
Chimney function has priority over the heating functions
Status
code
description action repair
C
FLASHING
chimney sweeper
function
- flashing left segment = high load
- flashing left segment
= low load
The two flashing right segments show the ionisation current
in microamperes
- chimney sweeper function
removes after 10 minutes
automatically
- chimney sweeper function
removes manually by pressing
set/reset button