User Manual

Copyright 2012 Page 32
Note: The Unknown response string will be issued if the value of “n” exceeds the valid range.
5.1.9 C Command:
Set Continuous Send Mode of Data Packet in ASCII Format
Issue
C[C/R]
Response
! [L/F][C/R]
Once Continuous Send Mode is set, the lens will continually measure, calculate and send
values in the D command format.
Example:
Issue: C[c/r]
Response:
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
D0001021T0195t1.4+8Z0000H0290024N0001018F0001024V006.8E+098z0000S5/100-009[l/f][c/r]
….
5.1.10 Kc Command:
Set Continuous Send Mode of Data Packet in Packed Binary Format
Issue
Kc[C/R]
Tag = d
Response
d s s s s TT t t z z h h h h n n n n f f f f v v e e Z Z S x x x x x x x x x [L/F][C/R]
Once Continuous Send Mode is set, the lens will continually measure, calculate and send
values in the Kd command format.
Example:
Issue: Kc[c/r]
Response:
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]
d@@O}CCŽˆ@@AFsh@@Oz@@P@ADA¢@@S5/100-009[l/f][c/r]