User Manual

Table Of Contents

Note: The response unknown: ?[L/F][C/R] will be issued by some early lens (S4I and RED

versions prior to 0.22, 0.35, 1.23, 1.31 and 3.03) which did not implement this command.

Example:

Issue: Kb9 [c/r] before Ka sent

Response: ?[L/F][C/R]

Issue: Ka[l/f]

Response: ! [l/f][c/r]

Issue: Kb9 [c/r] after Ka sent

Response: no response sent

5.1.13 X Command:

Set Display Units to Imperial

Issue

X[C/R]

Tag = X

Response

X [L/F][C/R]

Note: This command will change the display units on both channels for S4I lenses but will

change only the display units for the channel which issued the command for 5I lenses. See

Sections 6.1 and 6.2 for additional information regarding operation of X and Y commands.

Example:

Issue: X[c/r]

Response: X[l/f][c/r]

5.1.14 Y Command:

Set Display Units to Metric

Issue

Y[C/R]

Tag = Y

Response

Y [L/F][C/R]

Note: This command will change the display units on both channels for S4I lenses but will

change only the display units for the channel which issued the command for 5I lenses. See

Sections 6.1 and 6.2 for additional information regarding operation of X and Y commands.

Example:

Issue: Y[c/r]

Response: Y[l/f][c/r]