User Manual

Copyright 2012 Page 58
Normalized Zoom Value ZZ: (Note: Response depends on Lens Version #)
ZZ: Normalized Zoom Value – 0.000 to 1.000 for S4I Zoom and RED versions after 1.21,
1.30 and 3.02
10 bits in 2 bytes (characters)
ZZ
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
1
st
0
1
0
0
b09
b08
b07
b06
2
nd
0
1
b05
b04
b03
b02
b01
b00
Range: 0 – 1000 for Zoom Lenses
[This field not included in these early versions of S4I Prime lenses]
Normalized Zoom Value Z: (Note: Response depends on Lens Version #)
Z: Normalized Zoom Value – 0.00 to 1.00 for S4I Zoom and RED versions up to and
including 1.21, 1.30 and 3.02
7 bits in 1 byte (character)
Z
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
1
nd
1
b06
b05
b04
b03
b02
b01
b00
Range: 0 – 100 for Zoom Lenses
[This field not included in these early versions of S4I Prime lenses]
A.2 Bluetooth Communication Exchange
The series of command and responses to establish a Bluetooth communication
exchange as described in Section 4.2.2. [Note: The *string* sent is the lens Serial
Number.]
BOARD SENDS:
BLUETOOTH SENDS:
+++< c/r
l/f OK c/r l/f or c/r l/f ERROR c/r l/f
AT c/r
c/r l/f OK c/r l/f or c/r l/f ERROR c/r l/f
ATZ c/r
c/r l/f OK c/r l/f
AT+BTNAME=”…*string*...”c/r
c/r l/f OK c/r l/f
AT+BTSCAN c/r
c/r l/f OK c/r l/f
followed by: c/r l/f CONNECTED c/r l/f
A.3 Checksum Mode – G command