User Manual

Table Of Contents

If a valid Bluetooth connection is established, the baud rate will remain at 9600

and the lens will wait for the N command. The Baud rate must remain at 9600 once a

Bluetooth link is established, so any command to change baud rate at this point will

receive the error response. In the event a Bluetooth connection is not established

correctly within one second, the lens will issue a standard startup string (<) and wait

until an N command is received from the external interface.

The series of command and responses to establish a Bluetooth communication

exchange is outlined in Appendix A.2.

4.9.3 Table 5 Basic Lens Response Types

Basic Lens Response

What It Means

< l/f c/r

Standard Power-On

+++< l/f c/r

Look for Bluetooth Initialization

^ l/f c/r

5/I (only) – Channel temporarily locked

out

@ l/f c/r or @x l/f c/r

Loss of Program

? l/f c/r

Invalid command (Note: Will not be sent if

Inhibit Error Command has been issued.)

[Tag]…..data string …… l/f c/r

Echo command that was sent followed by

the requested data.

! l/f c/r

Acknowledge the command was received

and implemented.