Operator`s manual

800.423.0698 www.cookshack.com [e-mail]
Cookshack Model 350/360 SmartSmoker Oven
9
5. If using the Cook Mode, set cooking time by pressing and holding the COOK
TIME button while using the ADJUST TIME OR TEMP buttons to change
settings.
6. If using the Probe Mode, set probe temperature by pressing and holding the
PROBE TEMP button while using ADJUST TIME OR TEMP buttons to change
settings.
7. Press START.
To use the meat probe, simply insert the jack into the RCA receptacle on the
controller panel. Place the probe end through between the door and seal and
press into the largest piece of meat in the smoker oven. The oven will cook at the
set cooking temperature until the internal temperature of the meat reaches the
temperature at which the probe is set. At that point the controller will change to
the set holding temperature and remain there until the unit is manually shut
down. An audible signal indicates that the cook cycle is complete and that the
oven is going to the Hold Temperature Mode.
If cooking in the default Cook Mode the smoker will cook the product at the
selected cooking temperature for the selected cooking time and then change to
the selected holding temperature until it is shut off manually.
During the Cook Mode the LCD display of the IQ continually displays oven status
after the cook cycle has been started. Using these features any kitchen staff can
easily determine the status of the load in progress.
Please note that the oven temperature displayed while the oven is running is the
actual air temperature inside the oven. The probe temperature displayed is the
internal temperature of the product. In order to see the set cooking temperature,
probe temperature, or holding temperature, briefly press the corresponding
button.