Operator`s manual
13
Cookshack SM160, SM260 & SM360 Operator’s Manual, V. 15.3
2 Cook 190°F
Hold 140°F
7 Sausage 1” Casing 1 Smoke 140°F
2 Cook 180°F
Hold 140°F
8 Prime Rib 2 Smoke 180°F
2 Cook 250°F
Hold 140°F
Once one of these preset buttons has been pushed you may start a cook cycle
using these settings by simply pressing “START.”
All pre-sets are also programmable. To set a preset button to your own
preferences, make all settings as desired following the steps listed for each
Mode Setting. Once your settings have been made hold the pre-set button
down for 5 seconds to save the settings.
USB Download Instructions
With the IQ5 controller, you have the option to download your smoking, cooking
and holding logs to a FAT formatted USB flash drive. The IQ5 Controller will
hold 1023 cycles which is 512 hours of cook time.
To use this feature, while the smoker is on:
Plug in your flash drive to the USB port.
Press and hold the USB DATA button until the digital controller reads
“Filed Saved.”
It will then ask “Do you want to clear log?”
Press the UP or DOWN arrow until the controller reads “Yes” (The
smoker will clear your log as it runs out of memory. Clearing your log will
stop the accidental loss of data).
Press OK. See Figure 2 for example download.
Figure 2 – This is what your
download of information will look
like. Column A is the current Cook
Cycle. Column B is Oven
Temperature. Column C is Probe
Temperature.










