Owner`s manual

SPANISH
Before operating your cooktop, do the following:
● Remove all packing material and save for subsequent shipment or in case of
concealed shipping damage.
● Place the unit on a dry, level, hard, stable, and non-flammable surface.
● Keep unit away from other heat sources and allow at least two (2) inches
clearance for air circulation at sides, front and rear of the unit. If either the air
intake or exhaust outlet is blocked, the internal temperature will rise, causing an
error code to occur.
Grounding Instructions:
The cooktop must be properly grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing a safe path for the electric
current. The cooktop has a power cord with a 3-prong grounding plug, which must
be used in a compatible and properly grounded outlet. It is the owner’s
responsibility to replace any 2-prong wal loutlet with a properly grounded 3-prong
wall receptacle.
For your safety, never cut, remove, or disable the electrical (ground) connection
from the plug. Never use an adapter plug or an extension cord with the cooktop.
WARNING: Electric shock can result from an improperly grounded plug. Please
consult a qualified electrician if you have any questions about these grounding
instructions.
Before you begin:
Some units may come equipped with a removable IEC power cord. Please make
sure that this power cord is firmly attached to your CookTek unit BEFORE plugging
the unit into the power receptacle and before attempting operation.
Every installation site has different electrical wiring. Because many different local
codes exist, it is the Owner and Installer’s responsibility to comply with those
codes. CookTek is not responsible for any consequential damages as a result of
failure to comply with installation requirements.
● Read all installation instructions carefully before starting installation.
● Remove cooktop carefully from carton.
● Remove all loose packaging and accessories and save for subsequent
shipment or in case of concealed shipping damage.
● It is the responsibility of the installer to comply with all federal, state and local
codes.
● Any installation not matching the specifications discussed in this manual
automatically voids the product’s warranty.
● CookTek recmmends that a dedicated electrical line be used for each cooktop
installed. Electrical circuits should not be shared with any other electrical
equipment.
PREPARING YOUR COOKTEK COOKTOP FOR USE
ELECTRICAL INSTALLATION REQUIREMENTS*
Manual Universal 10336_A USINTL