Owner`s manual

7 12
MANUAL TRANSLATION ADDENDUM
FINNISH
Manual Universal 10336_A USINTL
Symptom Probable Cause Possible Solution
No power
(No lights or fan
noise)
● Unit unplugged
● No power to receptacle
● Plug unit into appropriate
receptacle
● Make sure that receptacle is
energized
● Check wall switches
● Check circuit breaker
● Plug a different electronic device
into the receptacle to make sure
that power is present
Pan does not heat ● Pan is not induction
efficient
● Pan diameter is less
than 7 inches
● Pan not centered over
cooktop logo
● Use induction efficient pan
● Use a larger induction efficient pan
● Center pan
Cooktop suddenly
stops heating
● Possible power brown
out
● Circuit shared with
another electrical device
● Air vents blocked or
insufficient air circulation
● Safety shut-off engaged
● Assure proper voltage/power levels
● Make sure the cooktop is not
sharing a circuit with other
electrical devices
● Check air vents to make sure that
they are not blocked. Make sure
that there is sufficient air flow
around the appliance.
● The safety shut-off will engage if an
empty pan is left on the cooktop
surface while the unit is working at
full power. Make sure that the
cooktop surfacce is clear. Wait 15-
20 minutes for the unit to reset.
Pan does not get
hot enough even
though power levels
are set to maximum
- induction efficient
pan in use
● Extension cord in use
● Circuit shared with
another electrical device
● DO NOT use extension cords.
Extension cords may affect the
power levels reaching the
appliance.
● Make sure that the cooktop is not
sharing a circuit with other
electrical devices.
Pan cooks
unevenly, does not
maintain heat level,
or overheats
● Pan is not induction
efficient
● Pan bottom may not be
flat enough
● Pan not centered over
cooktop logo
● Pan diameter is less
than 7 inches
● Use induction efficient pan
● Use flatter pan
● Center pan
● Use a larger induction efficient pan
TROUBLESHOOTING