Instruction Manual

Issue 1 28/7/2021 6
FITTING THE ICE COLLECTION BASKET
Fig. 1
BEFORE FIRST USE
1. Unpack the appliance and dispose of all packaging safely.
2. Check all parts are present and become familiar with the parts of
the ice maker and how to fit and lift out the ice collection basket
(fig.1).
3. Clean appliance and all detachable parts in accordance with the
cleaning section of these instructions.
4. Check that the drain on the underside of appliance is fully
closed.
5. Place the ice maker on a stable, flat surface that will be
undamaged by heat and water, that is within easy reach of a plug
socket and away from heat sources.
6. Ensure that there is 15cm clearance for adequate airflow around
all sides.
7. Allow the appliance to settle for 2 hours before using. Using
the appliance immediately can seriously damage the icemaker.
The resting time allows the oil in the compressor to flow back
into position and for the gas to settle.