Instructions / Assembly

Ventamatic, Ltd. | 100 Washington Ave, Mineral Wells, TX 76068 ▪ Phone: (800) 433-1626 ▪ www.bvc.com

Step 7: Hub Pairing Instructions

 Apply power to the unit and observe the LED lights on the control hub. Ensure the Power LED is illuminated on

the control hub.

 Download the Wi-Fan app available at your smart device store.

 Navigate to the WiFi settings utility on your smart device.

 Select the WVC Hub to connect. The SSID will start with WV-xxx…, which matches the ID to the label. The

label is located on the inside of the hub’s front cover.

 Enter the default password to join the network. The default password is myfan.

 Launch the Wi-Fan app to begin the pairing process.

For additional help: See the tutorial section in the Wi-Fan app.

Step 8 (Living space):

 Test the fan by switching the unit ON. Change the speed setting using the smart app. Ensure that the damper

doors open and close when the fan is ON and OFF respectively.

 Install the intake grille to the bottom side of the damper assembly from the living space below using the provided

white-headed screws.