Use and Care Manual

13 / 18
Remote Control Storage Area
Button: press this button to select “Sleep” function under cooling mode.
Before using your remote, install the AAA batteries into remote control.
1. Press and glide the battery cover on the back of the remote control, then you can remove the cover.
2. Insert two new alkaline AAA batteries into the battery compartment. Be sure to note the proper polarity.
3. Reattach the battery cover and make sure the locking tab clicks into place.
Notes:
 Use alkaline batteries only. Do not use rechargeable batteries.
 When replacing batteries, always replace both batteries with new batteries, do not mix old and new batteries.
 If the air conditioner will not be used for an extended period of time, remove the batteries from the remote
control.
4. Remote Control Storage
Note: In order to avoid losing the remote control, please put the remote control inside of the storage place when
you do not use it.
CAUTION
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water, do not use the remote
control if the batteries have any leakage.
.Multiple Protection Functions
1. Anti-frost protection function
Be sure to note proper
polarity of batteries