Specifications

1. Connect the line cord to the appropriately rated receptacle.
2. Be certain that all levels are down or set to the fully counter- clockwise position and
set all the EQs flat
3. Set the master level to the 12: 00 position
4. Connect output of your music instrument to the input of the M2/M3
5. Set the main/monitor switch to the monitor position
6. Turn on power to the M2/M3
7. Adjust the channel level for proper volume
8. Adjust the channel EQ as needed.
Front panel controls
Hi EQ (3)
An active tone control (shelving type: +/-15dB) that varies the hi frequency range.
(channels 1 & 2.)
EFX(4)
knob This knob selects the effect type and adjusts its depth for the channel.
Mid EQ (5)
An active tone control (peak/notch type: +/-15dB) that varies the mid frequencies.
(channel 2 .)
CH3/Monitor Level (6)
Controls the input level for channel 3. Controls high-impedance microphones or other high-
level sources equipped
with a 1/4" phone plug.
Headphone Level (7)
This sets the level to the headphone jack on the rear panel. To avoid damage to your hearing‚
make sure to turn the dial fully counter-clockwise before using headphones. Slowly turn the
knob clockwise until a comfortable listening level is set. This does not affect the master level.
Master Level (8)
This knob sets the overall level for the unit. Make sure the Master level is completely down
(full counterclockwise) before powering up the unit. This does not affect the headphone level.
Mp3 Level(9)
This knob sets the overall level for the MP3 player.
EFX Level(10)
knob This knob selects the effect type and adjusts its depth for channels.
LED Display(11)
Two line LCD display, three keys operate.
UBS host(12)
USB host slot provide user can store songs in U-disk
QUICK SET-UP GUIDE
Level (1)
Controls the 1/4" jack input level. (Channels 1 and 2)
Low EQ (2)
An active tone control (shelving type: +/-15dB) that varies the low frequency range.
(channels 1 & 2.)
Caution: Excessive low frequency boost causes greater power consumption and
increases the possibility of speakerdamage.