User's Manual

Antenna Setup

[ Network Search ]

Network search function is enable to search new TPs and all channels in all TPs.

* How to go” Network Search” menu :

Main menu -> Installation --> Antenna Setup -> Network Search (select “Yes”).

NOTE

Depending on certain TP or satellite, the Network Search function may not work.

[ DiSEqC 1.2 Settings ]

If you have a DiSEqC 1.2 motorized system to control your satellite antenna you have to make the

following setting.

First, you must select DiSEqC 1.2 on the DiSEqC mode in the Antenna Setup.

< ☞ Please refer to the Setting section >

1. Press OK on DiSEqC 1.2