User's Manual

Settings and Operations
15
2. You should set the East Limit and West Limit of your satellite antenna, if you use the satellite
receiver at first. Press OK button on the Change Limit item, set the East/West Limit.
3. Select satellite you want and DiSEqC1.2 Pos. will be set automatically.
DiSEqC1.2 Pos.
DiSEqC1.2 Pos. shows positioner value of the current satellite.
DiSEqC1.2 Command
DiSEqC1.2 Command changes the current mode between Installer and User.
Movement
In User mode this is used to tune the position of the motor. In Installer mode this is used to search for
the position of a satellite manually.
Store
Stores the current position of the motor for the selected satellite name.
Goto
Moves the motor to the stored position of the selected satellite name.